Hi, I have two 500 HFT's and I want to get one fitted with a regulator. I am looking for recommendations as to who could do a cracking job of this. Also looking to get the trigger tuned at the same time if this is possible. Any ideas as to who I can send this to for a really reliable top notch job?
Coggie.
AA 500 HFT Regulator
AA 500 HFT Regulator
Dundee Scotland.
AA S200, 500, EV2
AA S200, 500, EV2
-
Zed.
- Posts: 74
- Joined: Sat Aug 31, 2019 10:32 pm
- Location: Swansea, WALES. UK (maybe NSW in a few years...)
Re: AA 500 HFT Regulator
why do you want it regulated?
a reg doesn't improve accuracy, just lowers the air pressure at the firing-valve.
a good 'tune' should tighten consistancy & improve shot-count & is far cheaper than an aftermarket regulator
both my MPR's are un-regulated
bought one new (1997??)and the other was bought reg'd and I returned it to 'normal'
Rich.
a reg doesn't improve accuracy, just lowers the air pressure at the firing-valve.
a good 'tune' should tighten consistancy & improve shot-count & is far cheaper than an aftermarket regulator
both my MPR's are un-regulated
bought one new (1997??)and the other was bought reg'd and I returned it to 'normal'
Rich.
Bleugh!
it is my firm belief that people who declare they have a 'bigger signature than' someone are trying to make up for something else
it is my firm belief that people who declare they have a 'bigger signature than' someone are trying to make up for something else
Re: AA 500 HFT Regulator
I can't help you myself other than to say it might be a good idea to put your location in your profile and what reg you want fitted. There may be AAOC members who have fitted regs for other people depending on type required and whether you want it done locally or at distance.
Who is online
Users browsing this forum: No registered users and 80 guests