Finally did it!!

no avatar
Terry1
Posts: 14
Joined: Mon May 11, 2020 3:15 pm

Finally did it!!

Wed May 13, 2020 5:56 pm

Finally felt brave enough to strip my 410 tdr down to its main components. Any advice on what to do now re cleaning, replacing etc. The pot looks a bit ropey but hoping to wire wool it. Which bits need lubing? Does the inside of cylinder need any?

Any thoughts greatly appreciated

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: Finally did it!!

Fri May 15, 2020 12:30 pm

Just the usual clean and polish the hammer rail no need to lube inside cylinder, and I degrease the trigger sears and leave dry, others might use a lube on the sears, but I tend not too

no avatar
Terry1
Posts: 14
Joined: Mon May 11, 2020 3:15 pm

Re: Finally did it!!

Fri May 15, 2020 7:28 pm

All done and back together. Bit disappointed though as after all that the FPS only increased by around 10?!

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: Finally did it!!

Fri May 15, 2020 8:25 pm

But hopefully more consistent, .22 or .177

no avatar
Terry1
Posts: 14
Joined: Mon May 11, 2020 3:15 pm

Re: Finally did it!!

Fri May 15, 2020 8:33 pm

22. Will do a full string tomorrow but I was so happy that it worked and didn’t leak that I didn’t think to fire more than 10 through it. Good experience though and has definitely removed my fear of tinkering. It was shooting at a good 10 and a bit fp so to stay the same is still great. It’s a nice little gun and I do enjoy it

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: Finally did it!!

Fri May 15, 2020 8:45 pm

What pellets 16gr AADF ?
I've been trying out JSB RS these are 13. 43gr faster and flatter
My TDR seems to like them, and also very consistent, might be worth a try

no avatar
Terry1
Posts: 14
Joined: Mon May 11, 2020 3:15 pm

Re: Finally did it!!

Fri May 15, 2020 8:57 pm

18gn aa field heavy. Giving around 10.5 fpe. I like them and they are heavy hitting and accurate. I’ll try the others too Thoth and see how they do in my gun. As they’re lighter will they still deliver a good whack at 30/35yds as my understanding is that the fpe will be lower?

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: Finally did it!!

Fri May 15, 2020 9:12 pm

Yes, they certainly will and further
One of mine is doing a 10 shot string at 130bar 600 to 603fps
The other does 617-618fps at 130bar, but was doing 624-626 at 150bar
So turned it down a touch, now 617-619 am happy with that 👍

no avatar
Terry1
Posts: 14
Joined: Mon May 11, 2020 3:15 pm

Re: Finally did it!!

Fri May 15, 2020 9:22 pm

Now they sound like worth a try. Will order some from Pell pax in the morning

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: Finally did it!!

Fri May 15, 2020 9:57 pm

Jsramsbottom £10.59 lot cheaper than Pellpax 👍

Post Reply

Who is online

Users browsing this forum: No registered users and 24 guests