Getting to the hammer on a tdr 410

[Simshaz]

Hi
I have removed the anti tamper to allow me to strip the tdr so I am left with the trigger unit and the slide and rail. All this is still attached and on a 410 I would undo the Allen key on the back to separate the 2 halves to get to the hammer and spring. How do I do this on the TDR.

[Roger5]

It is held with two pins and it just pulls apart. Rog

[Simshaz]

Thanks, roughly where are they and do I need to drift them out

[Roger5]

The two pins are locating pins, there is nothing to drift, it will separate if you give it a wiggle and pull it apart. Rog

[Simshaz]

Cheers
Will try that later on.

[Simshaz]

Rog
Worked a treat, all polished and back together. May fit a de-pinger whilst the tube is off still
Many many thanks