CZ200 Hunter

no avatar
Falconhoof
Posts: 103
Joined: Thu Apr 09, 2015 8:21 am

CZ200 Hunter

Mon May 16, 2016 8:37 pm

I'm toying with the idea of buying one of these from Euroland. Now my question is, does anyone know if the stock fitting is different on these to the normal 200models?
My plan is (hopefully) to buy one as the longer cylinder would be ideal, but without the stock and then fit it into a target stock that I know a supplier has a very small amount of and the standard mkIII drops straight in with a slight alteration of trigger and bolt. There's a possibility it might not be able to do that if it's different to the standard mkIII action.
I can't find it searching the net but I'm sure I read somewhere the fitting is slightly different, but truthfully I'd actually be surprised of that was the case.
Hopefully I'm making some sense here :D

no avatar
pelletcaster
Posts: 80
Joined: Mon Feb 16, 2015 10:07 pm
Location: Carinthia / Austria

Re: CZ200 Hunter

Tue May 17, 2016 6:21 am

This could be a better solution for you:

http://www.balistas.com/air-rifles/cesk ... reen-45mm/
Live is a journey - not a destination.
-----------------------------------------
AA TX200 HC / LGU Master / LGV-CU / HW35 / HW50s (1974) / HW50S (2015) / HW90 / DIANA 34 T01
DS MK4iS-S / SPA P-12 / CZ200S-Green

no avatar
Falconhoof
Posts: 103
Joined: Thu Apr 09, 2015 8:21 am

Re: CZ200 Hunter

Tue May 17, 2016 12:33 pm

I didn't realise they had the longer cylinder on them. That gives me something to think about. Cheers for pointing that out.
Ugly things though arnt they? :D

no avatar
robertt
Posts: 111
Joined: Sun Feb 15, 2015 10:57 am

Re: CZ200 Hunter

Mon May 30, 2016 8:10 am

Would you have to remove moderator and unscrew cylinder for every refill ?

no avatar
pelletcaster
Posts: 80
Joined: Mon Feb 16, 2015 10:07 pm
Location: Carinthia / Austria

Re: CZ200 Hunter

Mon May 30, 2016 10:51 am

robertt wrote:Would you have to remove moderator and unscrew cylinder for every refill ?


Yes, but...
Contrary to the AA S200 the CZ200 models do not have a quickfill on front of cylinder.

You can get both - reg and/or quickfill (with or without gauge) from here:
http://www.altaros.cz/en/30-air-arms-czub
http://www.altaros.cz/en/cz/10-regulator-cz-200s#/

If you order from these guys they offer the service to install awa reg and/or quickfill against a small fee.
So no more hazzle at home to deal with threads,...
http://www.balistas.com/?fx=filtr&categ ... Ijt9fX0%3D

Just ordered the CZ 200S .177 green as stated above. For ME and only for ME.
:D :D :D

Happy shooting
Andreas
Live is a journey - not a destination.
-----------------------------------------
AA TX200 HC / LGU Master / LGV-CU / HW35 / HW50s (1974) / HW50S (2015) / HW90 / DIANA 34 T01
DS MK4iS-S / SPA P-12 / CZ200S-Green

User avatar
Raj
Posts: 2005
Joined: Sun Feb 15, 2015 9:36 pm
Location: Rugby

Re: CZ200 Hunter

Mon May 30, 2016 4:40 pm

You will not be disappointed.
“It's the Indian, not the arrow"

no avatar
Dave G
Posts: 10
Joined: Wed Jun 10, 2015 8:30 am

Re: CZ200 Hunter

Mon May 30, 2016 5:28 pm

Don't think ballistas will send to uk at min till a issue is sorted out with a gun they sent been held by customs till the court date a over zealous customs worker thinks it's a breach of the vcr act to order from the eu

User avatar
Raj
Posts: 2005
Joined: Sun Feb 15, 2015 9:36 pm
Location: Rugby

Re: CZ200 Hunter

Mon May 30, 2016 5:52 pm

Till it gets sorted, at lease Pelletcaster from Greece can enjoy it and tell us what if performs like :)
“It's the Indian, not the arrow"

no avatar
Dave G
Posts: 10
Joined: Wed Jun 10, 2015 8:30 am

Re: CZ200 Hunter

Mon May 30, 2016 6:33 pm

Yeah shouldn't be that long till all sorted out there a great shop imho been giving us on the Bullpup forum 5% discount on all purchases for couple of years now had a few high end bullpups off them as have plenty others

User avatar
poison dwarf
Posts: 6
Joined: Fri Jul 15, 2016 2:37 pm

Re: CZ200 Hunter

Fri Jul 15, 2016 2:40 pm

Bought my hunter from Welsh Willy. fitted a huma reg and quickfill. stunning little gun. It was a bit light for me so I bought an old two piece target stock for it. It fits straight on :) Very happy with it.

Post Reply

Who is online

Users browsing this forum: No registered users and 23 guests