good set up.

no avatar
tapps
Posts: 82
Joined: Sun Jan 12, 2020 4:39 pm
Location: Chichester / west sussex

good set up.

Wed Oct 07, 2020 5:23 am

i am more than happy with my .177 air arms S410F carbine set up, i'm using a MTC MAMBA PRO2 3-18 x50i on sportsmatch medium mounts ,i zeroed the scope in at 35 yard's, i found with this set up i never needed much hold over if any at 50 yard's.is this the norm ,i'm used to shooting with a .22 hw100kt.i will probably use the .22 hw100 for ratting & the .177-- S410 as my main hunting rifle.

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: good set up.

Wed Oct 07, 2020 8:08 am

50yds for me would be 1 mildot hold over, that's on 8 mag
And with a 30yd zero
AADF 4.52

no avatar
tonyc
Posts: 376
Joined: Mon May 29, 2017 10:55 am

Re: good set up.

Wed Oct 07, 2020 10:14 am

Much the same as Roger... I'll use a 30m zero and 8-9x magnification depending on pellet to give +1mil dot at 50yds.
You will notice a lot less holdover at long range than the .22.
The only thing I'd add about a 35yd zero is you will need to hold under for mid-range shots, 22-27yds... about half mil dot maximum at 23/24yds with 8-9x magnification.

no avatar
poguemahone
Posts: 688
Joined: Sun Feb 15, 2015 10:36 am
Location: stoke

Re: good set up.

Mon Oct 12, 2020 4:39 pm

from a 30yd zero my holdover at 50yds is 3 inches ;)

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: good set up.

Mon Oct 12, 2020 4:50 pm

So that would be a .22 then ?

no avatar
poguemahone
Posts: 688
Joined: Sun Feb 15, 2015 10:36 am
Location: stoke

Re: good set up.

Tue Oct 13, 2020 5:56 pm

Roger5 wrote:
Mon Oct 12, 2020 4:50 pm
So that would be a .22 then ?
no thats .177 Rog, havent shot .22 for 20 years. seem to remember from a 30 yd zero you need 2'' of holdover at 40yds with .22, so i reckon you'd need around 5'' at 50 :lol:

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: good set up.

Tue Oct 13, 2020 6:32 pm

With you now, sorry, I only work in mildots 🙄👍

no avatar
poguemahone
Posts: 688
Joined: Sun Feb 15, 2015 10:36 am
Location: stoke

Re: good set up.

Tue Oct 13, 2020 8:23 pm

Roger5 wrote:
Tue Oct 13, 2020 6:32 pm
With you now, sorry, I only work in mildots 🙄👍
i'm still in feet and inches mate. i did get a scope with usable mildots, but my youngest brother borrowed it for a couple of weeks, 3 years ago :lol:

Post Reply

Who is online

Users browsing this forum: No registered users and 32 guests