AirArms S400 seals

no avatar
John Donnison
Posts: 1
Joined: Sun Jan 26, 2020 2:56 pm

AirArms S400 seals

Sun Jan 26, 2020 3:15 pm

Hi all, could someone help me with the following problem i have with my Airarms s400f.
I bought this gun second hand, it was not cocking or firing as it should so i stripped it down and removed the bolt housing from the gun,
then greased the internals of the trigger mechanism, striker, spring etc.
Upon reassembly I noticed the 'o' rings, part no: 42 (x2) were missing. Does anyone know where these seals should fit into the bolt housing unit and barrel?
Thanks
John

User avatar
bgaltd
Posts: 932
Joined: Sun Feb 15, 2015 6:53 pm
Location: Somerset
Contact:

Re: AirArms S400 seals

Wed Jan 29, 2020 6:59 pm

John Donnison wrote:
Sun Jan 26, 2020 3:15 pm
Hi all, could someone help me with the following problem i have with my Airarms s400f.
I bought this gun second hand, it was not cocking or firing as it should so i stripped it down and removed the bolt housing from the gun,
then greased the internals of the trigger mechanism, striker, spring etc.
Upon reassembly I noticed the 'o' rings, part no: 42 (x2) were missing. Does anyone know where these seals should fit into the bolt housing unit and barrel?
Thanks
John
give me a ring if you're not sure John :D .

rgds.

Julian .

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests