Page 1 of 1

JSB EXACT 18.13

Posted: Wed Jul 27, 2016 9:57 pm
by mrjohns
I was wondering if the JSB 18.13 were accurate in the TX200 rifle? I have been shooting the JSB Exact 15.89 and they are accurate, but haven't tried the 18.13.

Re: JSB EXACT 18.13

Posted: Thu Jul 28, 2016 7:46 am
by gaz
Hi,
That is a heavy pellet for a springer.
Have you tried the JSB RS which are 13.43 they are really good in my HW80 and Rapid 7
http://jsb-diabolos.de/files/jsb_jumbo_rs_500.jpg
Gaz

Re: JSB EXACT 18.13

Posted: Fri Jul 29, 2016 8:31 pm
by mrjohns
gaz, Iv'e tried the JSB 13.43, but my rifle didn't care for them. I just got in some H&N FTT 14.66, that I going to try tomorrow. Iv'e got a Vortek PG2 SHO tune kit in my TX200 and I don't know if that makes a difference as to what it likes or not. I know it made it a lot smoother.

Re: JSB EXACT 18.13

Posted: Sun Jul 31, 2016 2:08 pm
by gaz
Hi,
You could try accupels they are 14.3 they are good in my .22 guns.

Gaz

Re: JSB EXACT 18.13

Posted: Sun Jul 31, 2016 2:13 pm
by mrjohns
DSC_0174 (1024x685).jpg
DSC_0174 (1024x685).jpg (198.67 KiB) Viewed 4836 times
I tested the H&N FTT 14.66 and they were almost as accurate as the JSB 15.89, at 30 yards. At 50 yards they were terrible. Groups were 2" and more. The JSB 15.89 at 50 yards was .400 and four of them went into .259. This is a photo of target. I knew I would have to post a picture of target for anybody to believe me. This was shot early morning in Arkansas. There was absolutely 0 wind. Perfect conditions for shooting air gun. I have been shooting center fire bench rest for many years, so I am not new to shooting.