Page 1 of 1

Air Arms S510 TDR

Posted: Mon Sep 14, 2020 12:36 pm
by Duaney
Hi guys I just bought an Air Arms S510 TDR from my local dealer very pleased with it previously I had an S410 both in .177.
On looking in the manual that came with it it says fill to 250 bar, now my 410 I filled to 190 bar
it seems a little high as I don't want to blow the seals so I'm filling to the same as my 410 ie 190 bar.
What do you think?

Thanks

Re: Air Arms S510 TDR

Posted: Mon Sep 14, 2020 2:18 pm
by Roger5
I think your right 👍
I think they made a reg'd TDR that uses higher pressure
But it would say S510r the r being reg'd
Just as an aside, I never fill my TDRs to 190bar, more like 165/170bar, where my sweet spot starts

Re: Air Arms S510 TDR

Posted: Mon Sep 14, 2020 2:27 pm
by Roger5
Just had a quick look
S510r TDR 250bar fill
S510 TDR 190bar fill
You might have the wrong handbook, stay safe. Rog

Re: Air Arms S510 TDR

Posted: Wed Sep 16, 2020 12:24 pm
by Duaney
Just realised mine is the regulated version so 250Bar is right oops.

Re: Air Arms S510 TDR

Posted: Thu Sep 17, 2020 5:04 pm
by Roger5
Duaney wrote:
Wed Sep 16, 2020 12:24 pm
Just realised mine is the regulated version so 250Bar is right oops.
You did the right thing to check though, better safe than sorry 😥 Cheers Rog

Re: Air Arms S510 TDR

Posted: Tue Dec 01, 2020 4:35 pm
by Walnut92
Yes it is not helped by the manual for the TDR R stating:

"The filling pressure of the S􏰑􏰐􏰓510 R TDR high power is 2􏰑50 bar (3􏰔626psi)"

Mine is a sub-12ft.lb. model not the XS and on first reading I thought that the 250 bar was for the 'high power' - i.e. XS version.

It would appear all regulated versions are therefore fillable to 250 bar.

What is important is to USE THE FILL GAUGE ON THE BOTTLE not the gun:

"The on board gauge should not be used during the filling process as the needle reaction speed has been slowed to prevent damage whilst filling."