Julian Bonds spares

Post Reply
User avatar
Blackbaronfish
Posts: 2980
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Julian Bonds spares

Mon Feb 16, 2015 6:45 am

bgaltd spares only in this section
http://www.airarmsspares.com/

BBF
Did I mention that I'm the only one to have attended EVERY annual meet since we started

no avatar
ditchdangler
Posts: 50
Joined: Sun Feb 15, 2015 11:21 pm
Location: Ashford, Kent

Re: Julian Bonds spares

Tue Feb 17, 2015 7:33 pm

Looking for loading bolt seals S200 .177 I think part number = CZ014 can you help, how much

no avatar
eboswan
Site Admin
Posts: 2607
Joined: Sun Feb 15, 2015 9:16 am
Location: swansea

Re: Julian Bonds spares

Tue Feb 17, 2015 7:56 pm

ditchdangler wrote:Looking for loading bolt seals S200 .177 I think part number = CZ014 can you help, how much


Julian is away for a few days,,no doubt he will be in touch soon :)
IS MY SIGNATURE BIGGER THAN RAYS. Cz 452 american .22+sak mod
S200. .177

no avatar
ditchdangler
Posts: 50
Joined: Sun Feb 15, 2015 11:21 pm
Location: Ashford, Kent

Re: Julian Bonds spares

Tue Feb 17, 2015 10:46 pm

eboswan wrote:
ditchdangler wrote:Looking for loading bolt seals S200 .177 I think part number = CZ014 can you help, how much


Julian is away for a few days,,no doubt he will be in touch soon :)



Ok thanks

User avatar
bgaltd
Posts: 821
Joined: Sun Feb 15, 2015 6:53 pm
Location: Somerset
Contact:

Re: Julian Bonds spares

Wed Feb 18, 2015 5:47 pm

ditchdangler wrote:Looking for loading bolt seals S200 .177 I think part number = CZ014 can you help, how much



back from Cornwall :D :D .

CZ014 3 X 1 NBR 70 LOADING BOLT O RING £0.42 - 0.04 =0.38 each

how many do you want ?

no avatar
ditchdangler
Posts: 50
Joined: Sun Feb 15, 2015 11:21 pm
Location: Ashford, Kent

Re: Julian Bonds spares

Wed Feb 18, 2015 8:04 pm

Hi Julian, many thanks for the rapid response, I am looking at other bits and pieces and will get back to you tomorrow with a shopping list.

Regards - Alan

no avatar
raider
Posts: 8
Joined: Mon Feb 16, 2015 8:56 am

Re: Julian Bonds spares

Thu Feb 19, 2015 7:29 pm

Julian, I am considering making my S410 into an Air Scout Carbine, So I would need to use a long eye relief scope or optics mounted well forward of the current Scope mounting rail. Do you know if the adjustable barrel mounted scope rail off the S 200 part number DV021 would be retro fittable to the S410? and what price the part is please?

no avatar
wastrel
Posts: 876
Joined: Sun Feb 15, 2015 5:26 pm

Re: Julian Bonds spares

Thu Feb 19, 2015 7:50 pm

raider wrote:Julian, I am considering making my S410 into an Air Scout Carbine, So I would need to use a long eye relief scope or optics mounted well forward of the current Scope mounting rail. Do you know if the adjustable barrel mounted scope rail off the S 200 part number DV021 would be retro fittable to the S410? and what price the part is please?

as long as the 200 barrel is same outer size/diameter or larger it will or could be made to- work, so if you find the two outer diameter sizes, you`ll know. if any member could post the diameter size of a 400 barrel, the 200 barrel is (off to find my calipers, bear with me!) ahem, 15mm- 15.14 to be exact but I`ll put the .14 down to me not being an engineer!
AA S200
Walther LGU
Westlake fit for the bin
Webley Raider 10
Walther underlever
1st Grand Order member

User avatar
bgaltd
Posts: 821
Joined: Sun Feb 15, 2015 6:53 pm
Location: Somerset
Contact:

Re: Julian Bonds spares

Thu Feb 19, 2015 8:46 pm

unless you have the S200 barrel on your 400 it(CZ004 SIGHT BASE) wont fit .

have you considered reach forward mounts ?

no avatar
raider
Posts: 8
Joined: Mon Feb 16, 2015 8:56 am

Re: Julian Bonds spares

Thu Feb 19, 2015 10:28 pm

Ok Thanks guys , plan B it is, there was a purpose made Picatinny rail mount sold in the US for the S410 but its discontinued, I'll try and find something else. Appreciate your time chaps, cheers.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest