Page 1 of 1
o-rings for power adjuster s510 fac
Posted: Wed May 04, 2016 8:16 pm
by BforBarney
Hi, I need the above and a little info on how to fit them, thanks.
Re: o-rings for power adjuster s510 fac
Posted: Wed May 04, 2016 8:43 pm
by eboswan
Unfortunately. Julian isnt very well at the moment so orders for spares will be on hold for a short while.
____________________________________________________________________________________________________
Re: o-rings for power adjuster s510 fac
Posted: Sat May 21, 2016 5:21 pm
by RichardCowan1422
Is there any update on this query,as I would be interested in knowing how theses seals are fitted
Re: o-rings for power adjuster s510 fac
Posted: Sat May 21, 2016 7:10 pm
by Blackbaronfish
The adjuster is held in place by a grub screw from the bottom. Once removed the adjuster can be pulled out and the o'rings replaced. If you find the adjuster moves too easily, extra tightening of the grub screw will help.
BBF
Re: o-rings for power adjuster s510 fac
Posted: Sun May 22, 2016 5:28 pm
by RichardCowan1422
Many thanks the information supplied is very help full. I was finding that the adjusting screw moved when a number of shots was fired through the rifle. The adjusting level was being held in place during the shoot today by electric tape !! Screw didn't move.