o-rings for power adjuster s510 fac

no avatar
BforBarney
Posts: 32
Joined: Thu Jul 30, 2015 11:03 am

o-rings for power adjuster s510 fac

Wed May 04, 2016 8:16 pm

Hi, I need the above and a little info on how to fit them, thanks.

no avatar
eboswan
Site Admin
Posts: 3222
Joined: Sun Feb 15, 2015 9:16 am
Location: swansea

Re: o-rings for power adjuster s510 fac

Wed May 04, 2016 8:43 pm

Unfortunately. Julian isnt very well at the moment so orders for spares will be on hold for a short while.
____________________________________________________________________________________________________
IS MY SIGNATURE BIGGER THAN RAYS. Cz 452 american .22+sak mod
S200. .177

no avatar
RichardCowan1422
Posts: 3
Joined: Sat May 21, 2016 5:11 pm

Re: o-rings for power adjuster s510 fac

Sat May 21, 2016 5:21 pm

Is there any update on this query,as I would be interested in knowing how theses seals are fitted

User avatar
Blackbaronfish
Posts: 3690
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: o-rings for power adjuster s510 fac

Sat May 21, 2016 7:10 pm

The adjuster is held in place by a grub screw from the bottom. Once removed the adjuster can be pulled out and the o'rings replaced. If you find the adjuster moves too easily, extra tightening of the grub screw will help.

BBF
Did I mention that I'm the only one to have attended EVERY meet since we started

no avatar
RichardCowan1422
Posts: 3
Joined: Sat May 21, 2016 5:11 pm

Re: o-rings for power adjuster s510 fac

Sun May 22, 2016 5:28 pm

Many thanks the information supplied is very help full. I was finding that the adjusting screw moved when a number of shots was fired through the rifle. The adjusting level was being held in place during the shoot today by electric tape !! Screw didn't move.

Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests