seals and parts

no avatar
jinxs
Posts: 19
Joined: Sun Feb 15, 2015 10:27 pm

seals and parts

Fri Jan 15, 2016 7:56 am

Hi Julian, could I have a price for a s410 .177 seal kit and a s200 .177 seal kit please.
Also a price for parts 28 to 40 for the s510.
Cheers,
Steve.

User avatar
bgaltd
Posts: 937
Joined: Sun Feb 15, 2015 6:53 pm
Location: Somerset
Contact:

Re: seals and parts

Fri Jan 15, 2016 3:08 pm

jinxs wrote:Hi Julian, could I have a price for a s410 .177 seal kit and a s200 .177 seal kit please.
Also a price for parts 28 to 40 for the s510.
Cheers,
Steve.

could i have those part numbers for parts 28 to 40 please Steve . i have 4 different exploded diagrams for the 510 :-(.

no avatar
jinxs
Posts: 19
Joined: Sun Feb 15, 2015 10:27 pm

Re: seals and parts

Fri Jan 15, 2016 4:17 pm

Hi Julian, part numbers are s500-sl , s540a-sl , s142, s502-sl, s130, s332, s125, e144, s541-1, s541, s542, s264, e127.
I should ask if it is possible to take the 410 bolt block off and put a 510 block on ?
Cheers,
Steve.

User avatar
bgaltd
Posts: 937
Joined: Sun Feb 15, 2015 6:53 pm
Location: Somerset
Contact:

Re: seals and parts

Fri Jan 15, 2016 5:06 pm

jinxs wrote:Hi Julian, part numbers are s500-sl , s540a-sl , s142, s502-sl, s130, s332, s125, e144, s541-1, s541, s542, s264, e127.
I should ask if it is possible to take the 410 bolt block off and put a 510 block on ?
Cheers,
Steve.

S500-SL BOLT HOUSING S510 SIDE LEVER 77.37- 7.74= 69.63
S540A-SL LOADING BOLT SIDE LEVER .177 12.00- 1.20= 10.80
S142 DETENT BUFFER .177 1.24 X 2.62 NBR 70 (BS102) 0.44- 0.04 =0.40
S502-SL BOLT HOUSING BUSH .177 CAL 3.24- 0.32= 2.92
S130 COCKING LEVER PIVOT BLOCK 21.38- 2.14= 19.24
S332 ? is it S322 M4 X 12 CSK SKT / TRIGGER CHASSIS SCREW 0.44- 0.04= 0.40

S125 COCKING ARM 21.99- 2.20= 19.79
E144 COCKING ARM PIVOT PIN 3X23.8 ROLLER 0.83 -0.08= 0.75
S541 BEARING 684HZZ SRL 3.45- 0.35= 3.11
S541-1 SHIM AS4.30X5.85X0.12 EA 1.04- 0.10= 0.94
S542 COCKING LINK BUSH 3.24- 0.32= 2.92
S264 COCKING LINK 10.40 1.04 =9.36
E127 COCKING LINK PIVOT PIN 3 X 7.8 ROLLER 0.83- 0.08= 0.75

S701 S400/S410 SEAL KIT 5.35- 0.54= 4.82

CZ039 6.5 X 2 O RING 70 0.60- 0.06= 0.54
CZ031 21 X 2.5 NBR 70 O RING 0.44- 0.04= 0.40x2=0.80
CZ014 3 X 1 NBR 70 LOADING BOLT O RING 0.44- 0.04 =0.40

Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests