New member 410 Carbine

no avatar
Scott Tee
Posts: 3
Joined: Wed Oct 16, 2019 11:21 am

New member 410 Carbine

Wed Oct 16, 2019 11:41 am

Hi everyone.

Most forums don’t like first posts being for help, so here’s a bit about me first. I live in Northumberland now but was in Kent for a long time. Getting back into shooting now, slowly, and have been to a local club. I will be plinking on the range and hopefully a bit of ratting / rabbitting once I am confident of my abilities.

Now for the help request...

I have got myself a 410 Carbine. Made in 2000 according to the serial number and AirArms. It was extremely cheap as it is in very poor condition.

To give you an idea of its life the barrel O ring has gone missing, so a previous owner has nipped the barrel band up in a vice to touch the barrel. Nice!

It also leaks. A lot. I have a seal kit. As well as the barrel band I will need a magazine and moderator. I will be fitting a Weihrauch by making a suitable tube in my small lathe and cutting a thread onto it, then using bearing lock to fix that to the tip of the barrel.

First job over winter though is strip, clean, new seals and parts as needed.

I’ve worked on springers and CO2 but this is my first time inside a PCP.

I have been looking for a strip down guide everywhere but cannot find one. I found a few for various tasks but not a start to finish strip and re-assemble. I’m sure there must be one somewhere so if anyone can assist that would be great.

Many thanks for having me.

no avatar
Jammy13
Posts: 26
Joined: Tue Jul 02, 2019 5:00 pm
Location: Northumberland

Re: New member 410 Carbine

Wed Oct 16, 2019 6:51 pm

Hi Scott Tee,
I live in Northumberland and can help you sort out the rifle. You will have to come to my house which is in Bedlington. This will save me having to pack my tools and then find I'm short of something. Where are you?

Regards,
Keith

User avatar
Blackbaronfish
Posts: 3472
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: New member 410 Carbine

Wed Oct 16, 2019 7:28 pm

Well done that man.
This is what we are all about.

BBF
Did I mention that I'm the only one to have attended EVERY annual meet since we started

User avatar
Blackbaronfish
Posts: 3472
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: New member 410 Carbine

Wed Oct 16, 2019 7:29 pm

Blackbaronfish wrote:
Wed Oct 16, 2019 7:28 pm
Well done that man.
This is what we’re all about.

BBF
Did I mention that I'm the only one to have attended EVERY annual meet since we started

no avatar
Outandabout
Posts: 662
Joined: Tue Feb 17, 2015 8:13 pm
Location: Ferryhill Co Durham

Re: New member 410 Carbine

Wed Oct 16, 2019 7:57 pm

EXCELLENT STANDARDS

no avatar
Scott Tee
Posts: 3
Joined: Wed Oct 16, 2019 11:21 am

Re: New member 410 Carbine

Wed Oct 16, 2019 8:22 pm

Jammy13 wrote:
Wed Oct 16, 2019 6:51 pm
Hi Scott Tee,
I live in Northumberland and can help you sort out the rifle. You will have to come to my house which is in Bedlington. This will save me having to pack my tools and then find I'm short of something. Where are you?

Regards,
Keith
That’s very kind,

I’m in Seghill but can get to you easily. Very keen to DIY and learn, but happy to listen!

no avatar
Jammy13
Posts: 26
Joined: Tue Jul 02, 2019 5:00 pm
Location: Northumberland

Re: New member 410 Carbine

Wed Oct 16, 2019 9:54 pm

PM sent.

no avatar
Scott Tee
Posts: 3
Joined: Wed Oct 16, 2019 11:21 am

Re: New member 410 Carbine

Fri Oct 25, 2019 12:02 pm

Hi again,

A big shout out to Keith (Jammy13) who has taken me through strip, inspect and rebuild. Very helpful, much appreciated.

no avatar
143granville
Posts: 214
Joined: Mon Apr 03, 2017 8:15 pm
Location: barwell leicestershire .

Re: New member 410 Carbine

Fri Oct 25, 2019 6:15 pm

great to see someone helping others
well done .

no avatar
Roger5
Posts: 887
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: New member 410 Carbine

Fri Oct 25, 2019 7:33 pm

Well done Keith, it's what we're all about, there's some good people on here. Rog

Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests