Page 3 of 3
Re: Air Arms Q Tech silencer
Posted: Mon Jun 17, 2019 10:11 pm
by RichieRich612
Finally solved the Q-tech problem. Removed the baffles, threw them in the bin and replaced them with hair rollers wrapped in thick pan scourers
. No more clipping and whisper quiet. Come on Air Arms please don't try and re-invent the wheel.
Re: Air Arms Q Tech silencer
Posted: Tue Jun 18, 2019 9:24 pm
by TenMetrePeter
Yep. It’s all you need for non-FAC air gun.
Re: Air Arms Q Tech silencer
Posted: Wed Jun 19, 2019 9:23 pm
by RichieRich612
TenMetrePeter wrote: ↑Tue Jun 18, 2019 9:24 pm
Yep. It’s all you need for non-FAC air gun.
Yes it is Peter and in my Fac Gun the only difference is a couple of washers between the baffles.
P.S I studied your videos on the trigger and how to make it better, still rubbish.
Re: Air Arms Q Tech silencer
Posted: Thu Jun 20, 2019 9:42 am
by TenMetrePeter
Replace all the sears and springs. Someone may have had the Dremel to them
Re: Air Arms Q Tech silencer
Posted: Thu Jun 20, 2019 11:35 am
by RichieRich612
TenMetrePeter wrote: ↑Thu Jun 20, 2019 9:42 am
Replace all the sears and springs. Someone may have had the Dremel to them
I'll take the side plate off and send you a picture, see if you notice anything out of the ordinary.
It's a 3 sear trigger unit so shouldn't be too much bother to strip and re-assemble.
I'd rather you have a quick look than fork out on new sears when a home modification can be done.
Rich
Re: Air Arms Q Tech silencer
Posted: Thu Jun 20, 2019 1:45 pm
by TenMetrePeter
“...send you a picture, ...”
Good luck with that one!
I’ll pm you with an email address to attach it to.
Re: Air Arms Q Tech silencer
Posted: Thu Jun 20, 2019 10:09 pm
by RichieRich612
Sent Peter have you received it?
Richard