S410 TDR

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

S410 TDR

Thu Feb 21, 2019 2:19 pm

Does anyone know or could measure the soft backpack that comes with the S410 TDR thanks Rog

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: S410 TDR

Thu Feb 21, 2019 3:42 pm

Roger5 wrote:
Thu Feb 21, 2019 2:19 pm
Does anyone know or could measure the soft backpack that comes with the S410 TDR thanks Rog
Found it 65mm

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: S410 TDR

Sat Feb 23, 2019 8:58 am

And just bought the TDR, sold an S410 .22 to help towards the cost, and its the S410 TDR .177 not the new S510 s/l

no avatar
tonyc
Posts: 376
Joined: Mon May 29, 2017 10:55 am

Re: S410 TDR

Sun Feb 24, 2019 9:40 pm

Can you let me know the shot count, Rog.
I believe the .177 only came with the longer barrel... can't remember the length offhand, but I recall the original TDR was in .22 only, then AA increased the barrel length and released the .177

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: S410 TDR

Mon Feb 25, 2019 8:19 am

Hi Tony, will do, not had the chance to shoot it yet, picked it up from Lambert of Ringwood last Friday, doesn't look like it's had much use though. Cheer's Rog

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: S410 TDR

Wed Feb 27, 2019 9:39 pm

Played with it today, as expected sweet spot starts at 160bar then I'm getting 40 all on the money, it's now in bits A/T removed all cleaned up i.e. Hammer rail, sorted trigger, will finish it tomorrow, and see if there's any improvement, it's very accurate, just like all my other A/As

no avatar
John814ce

Re: S410 TDR

Thu Mar 14, 2019 6:46 am

I know aa set the firing pot to 57mm on the tdr's/carbines (the guns with the 30cm cylinders), And 58mm on the 40cm cylinders. Not sure about fac 50cm cylinders. But if you want to tighten the 40 sweetspot shots to 3-5 fps on the carbines/30cm cylinders, then set the pot at 56mm. Also you lose the fire ping sound in the cylinder when shortening the pot length to around 56mm- 56.5mm, If you didn't already know.

Post Reply

Who is online

Users browsing this forum: No registered users and 33 guests