S300 trigger help please

no avatar
Peddy
Posts: 3
Joined: Wed Apr 06, 2016 11:05 pm

S300 trigger help please

Wed Feb 28, 2018 11:53 pm

I've finally got my first AA pcp, was going to try get an early s200 but a lovely s300 came up at right money. First impression is what a well made gun. But the trigger has me baffled. Had a look inside and mine is the 2sear trigger, I find the 1st stage too long and 2nd a big light. When I adjust as per manual i end up with a creepy unpredictable mess. I can only get OK by having a very long 1st and very light 2nd, is this right. I'm thinking I'm inexpecting too much for a 20 yr old design? Also any ideas for giving the uncocked trigger some Spring tension, never had a floppy trigger before!!!! Any comments would be appreciated

no avatar
TenMetrePeter
Posts: 1043
Joined: Wed Jun 29, 2016 5:40 pm
Location: Luton Beds UK

Re: S300 trigger help please

Thu Mar 01, 2018 8:33 am

The S300 and 310 don't seem to appear in the forum much, but from the parts diagrams the 2 sear trigger seems to be the same design as the S400 early and very similar to the latest 3 sear design.
I made this "reset" video for the 3 sear system but it should work for yours.
https://youtu.be/80CMGEDpWmc

The internals of the latest three sear system are shown here but imagine it without the little one.
https://youtu.be/2ge3cfq1AOQ

I would not worry about the floppy trigger. It is normal and unless you have a problem scaring prey as you jog through the undergrowth it isn't normally a problem. The long first stage is a safety feature in my book and if you decide not to fire, releasing it will reinstate the full sear engagement.

no avatar
143granville
Posts: 263
Joined: Mon Apr 03, 2017 8:15 pm
Location: barwell leicestershire .

Re: S300 trigger help please

Thu Mar 01, 2018 8:21 pm

as peter said long first stage is a good safety .
nice gun the 300 guy where I worked had one .

no avatar
Teggwynn
Posts: 12
Joined: Mon Feb 26, 2018 8:31 pm
Location: Wales (gods country)

Re: S300 trigger help please

Fri Mar 02, 2018 9:03 pm

I’v not long got myself a s300, mine doesnt seem to have a 1st stage at all, more like a top notch set trigger. Boy oh boy its a sweet trigger though
Air arms tx200 hc .22

Weihrauch Hw80 mk1 1983 .22 Cs stock, mk2 k barrel, Magic dust installed

Hw80 project

Air arms s300 .22

Diana series 70 model 76 .22

Weihrauch Hw90

Weihrach Hw35

Loads more!!

no avatar
TenMetrePeter
Posts: 1043
Joined: Wed Jun 29, 2016 5:40 pm
Location: Luton Beds UK

Re: S300 trigger help please

Fri Mar 02, 2018 10:51 pm

Teggwynn wrote:
Fri Mar 02, 2018 9:03 pm
I’v not long got myself a s300, mine doesnt seem to have a 1st stage at all, more like a top notch set trigger. Boy oh boy its a sweet trigger though
They can be set thst way. I just worry about it being permanently a hair way from release.

Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests