MPR FT

no avatar
Mr. C
Posts: 1
Joined: Thu Oct 12, 2017 4:55 pm

MPR FT

Mon Jan 22, 2018 7:22 am

Considering replacing the standard air stripper for a moderator but concerned about upsetting the balance as I'm used to it as it is.
I'd appreciate the views of anyone that's done it.
Tia

no avatar
Bezzer
Posts: 22
Joined: Sun Nov 13, 2016 11:15 pm

Re: MPR FT

Mon Jan 22, 2018 4:25 pm

The standard stripper is pretty long can't see there being a lot of difference changing to a mod depending on the size of it. ..but you'll not know until you try it yourself, everyone's opinion will be different. My standard 400 I use for HFT always felt way too long and "wafty" with an air arms mod on it so fitted a much shorter stripper, saying that it still seemed not right and now I've converted it to a carbine length for much better balance.

no avatar
chris.e
Posts: 31
Joined: Sun Feb 15, 2015 12:00 pm

Re: MPR FT

Mon Jan 22, 2018 4:31 pm

Mod's are quite light so It won't effect balance too much, but it will catch a bit more wind when on aim than a stripper would due to its size.
I'm afraid there's only one way of finding out your preference.

no avatar
Mr. C
Posts: 1
Joined: Thu Oct 12, 2017 4:55 pm

Re: MPR FT

Mon Jan 22, 2018 5:27 pm

Yeah... I'm going to have to try it out. Thanks for the input.

no avatar
Zeewulf
Posts: 38
Joined: Sun Feb 15, 2015 3:49 pm

Re: MPR FT

Fri Jan 26, 2018 6:28 pm

Mr. C wrote:Yeah... I'm going to have to try it out. Thanks for the input.


Look at Huggett Moderators as they come in different lengths if your worried about weight and fit the MPR FT.
Air Arms MPR FT

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests