Page 1 of 1
TX 200 SR
Posted: Sat Dec 17, 2016 6:06 pm
by clunker
Anybody know what 177 walnut stocked TX 200 SR in good condition . fetches now ??? HOLLY
Re: TX 200 SR
Posted: Sat Dec 17, 2016 10:59 pm
by Blackbaronfish
You would be looking at £450 to £500 ish in excellent condition.
BBF
Re: TX 200 SR
Posted: Sun Dec 18, 2016 7:37 pm
by clunker
Well you surprise me there , i would have thought £ 350 top whack . bit to delicate for me i think . got a K97 action . looking for a CS 700 or 800 stock to go with it ??? HOLLY
Re: TX 200 SR
Posted: Sun Dec 18, 2016 8:01 pm
by TenMetrePeter
Rarity value. Like rocking horse droppings.
Re: TX 200 SR
Posted: Sun Dec 18, 2016 10:51 pm
by Blackbaronfish
Its also the fact there are no spares.
BBF
Re: TX 200 SR
Posted: Mon Dec 19, 2016 1:01 am
by FPoole
The rail looks like it's just the stock bracket extrusion before it's cut into little bits, but the parts are pretty much gone. That said, I have a friend that has shot his MarkII SR for at least 20 years in FT. Most all the bluing is worn off and it has a sort of brown patina, but it's still going strong. I wouldn't call them delicate at all.
Re: TX 200 SR
Posted: Mon Dec 19, 2016 6:40 am
by Blackbaronfish
I wouldn't call them delicate at all.
They are well built and a good weight. The set up of the sleigh is probably the hardest bit to get right, but once done correctly it transforms the cycle
BBF
Re: TX 200 SR
Posted: Mon Dec 19, 2016 11:52 pm
by clunker
I bought this one a while back off a club member . when i put it over the chrono it was only doing 530 fps in 177 . so i had it down and it did not have a top hat in it or piston weight . so i sent off for tin bums stage one kit ( £ 22 ) . i have just fitted it and hope fully it will sort that out . not looking for big power 10 to 10 and a half foot pounds will do it .as long as it is smooth . anyway i like simple so a normal springer i think i will get . up for sale after christmas in the spring . when a young ( or not so young ) mans fancy turns to air rifles .??? HOLLY
Re: TX 200 SR
Posted: Tue Dec 20, 2016 10:35 am
by Blackbaronfish
They would still shoot smooth at 11.5lb
BBF