s510 xtra fac accuracy issues

User avatar
Blackbaronfish
Posts: 3690
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: s510 xtra fac accuracy issues

Wed Apr 27, 2016 6:39 pm

When ever my father had a cold he swore by placing a blob of Vic on his tongue.....did it for years but it didn't make it right :lol: .

Your method may work but it's not really best practice .

BBF
Did I mention that I'm the only one to have attended EVERY meet since we started

no avatar
GrandadG
Posts: 818
Joined: Sun Feb 15, 2015 5:35 pm
Location: Bedale North Yorkshire

Re: s510 xtra fac accuracy issues

Wed Apr 27, 2016 6:46 pm

Blackbaronfish wrote:When ever my father had a cold he swore by placing a blob of Vic on his tongue.....did it for years but it didn't make it right :lol: .

Your method may work but it's not really best practice .

BBF

Bloody hell Ray, i remember my grandmother doing that 8-)
HW100T .177
AA Prosport .177
AA S200 .177 Huma Reg

User avatar
Blackbaronfish
Posts: 3690
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: s510 xtra fac accuracy issues

Wed Apr 27, 2016 7:55 pm

You couldn't make it up :lol:

BBF
Did I mention that I'm the only one to have attended EVERY meet since we started

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: s510 xtra fac accuracy issues

Wed Apr 27, 2016 9:20 pm

Hi BBF, I think you will find that air arms do pretty much the same thing I do, they dump the air by undoing the male connector s472 and the seal s484 pops out and dumps the air. But if you want to spend time shooting it down and wearing your gun out carry on. Seals are cheap. Rog

no avatar
BforBarney
Posts: 32
Joined: Thu Jul 30, 2015 11:03 am

Re: s510 xtra fac accuracy issues

Thu Apr 28, 2016 11:20 am

Ok so I got my chronograph today and here's the results.

Image

I think I'm down on power by and average of 50fps, I was wondering why these shot so well on full power when they are supposed to perform best at 900fps but that's what they were shooting at basically, over the 1st 30 shots disregarding shots 15 and 16 I only have a 21fps spread! I must have done a good job on the striker rod. I've already changed the breech seal so maybe as suggested here already I could be loosing air through the o rings on the power adjuster but if there was something wrong with an o-ring I wonder would the powercurve be so good, which brings me to the conclusion that my hammer spring is a bit on the light side and not hitting the valve hard enough, any feedback greatly appreciated, thanks.

User avatar
Iced Tiger
Posts: 333
Joined: Sun Feb 15, 2015 2:09 pm
Location: Knott End-on-Sea

Re: s510 xtra fac accuracy issues

Thu Apr 28, 2016 4:30 pm

Here is a shot string over the chrono of my 510 FAC with AA Diabolo Field 16.0gr 5.52mm.
SHOT FPS FT/LBS
1 912.51 29.6
2 916.76 29.88
3 921.05 30.16
4 923.21 30.29
5 928.66 30.66
6 934.16 31.02
7 935.27 31.09
8 938.62 31.31
9 940.86 31.47
10 941.99 31.54
11 948.8 32
12 944.24 31.69
13 948.8 32
14 953.39 32.31
15 951.09 32.15
16 953.39 32.31
17 948.8 32
18 947.65 31.92
19 945.38 31.77
20 943.11 31.61
21 945.38 31.77
22 940.86 31.47
23 937.5 31.24
24 934.16 31.02
25 931.95 30.87
26 927.56 30.58
27 924.3 30.37
28 918.9 30.01
29 918.9 30.01
30 912.51 29.6

AVG 935.66 31.12
AA FTP 900 .177 ~ Hawke Airmax 30 8-32X50
AA Ultimate Sporter R .177 ~ Hawke Airmax 30 8-32X50
AA Ultimate Sporter XS Xtra FAC .22 ~ Hawke Nite-Eye Digi 6-24X50
AA TX200 HC MKIII .177 ~ Hawke Nite-Eye Digi4-16X50
AA Alfa Pistol .177 ~ Very Shiny

no avatar
BforBarney
Posts: 32
Joined: Thu Jul 30, 2015 11:03 am

Re: s510 xtra fac accuracy issues

Thu Apr 28, 2016 7:51 pm

Thanks for that tiger, im not too far off that.

User avatar
Blackbaronfish
Posts: 3690
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: s510 xtra fac accuracy issues

Thu Apr 28, 2016 8:57 pm

It all looks good to me. The spread wouldnt show up in the field :D

BBF
Did I mention that I'm the only one to have attended EVERY meet since we started

no avatar
mark holding
Posts: 64
Joined: Tue Dec 22, 2015 7:07 pm

Re: s510 xtra fac accuracy issues

Fri Apr 29, 2016 4:39 pm

BforBarney wrote:Maybe, just maybe I have it sorted :D

Image

I'm surprised the jsb 15.9 gr didn't shoot better and 5 of the bisley mags went in one hole followed by 5 flyers but the 18gr diabolo's did well 13mm 6 shot group at 43yards in breezy conditions, so maybe now it's down to pellet choice, I'm waiting on a tin of jsb 18gr pellets and some pellet lube, so hopefully they'll do the business.



I wouldn't worry too much about the grouping yet. Have you tried cleaning the barrel, then firing some more shots through the barrel to lead it up again. I have heard many times that you clean the barrel when your groups start to open up, so that may help, and it doesn't cost anything, apart from a pull through, which I have done today on my rifle using string and some patches.

no avatar
mark holding
Posts: 64
Joined: Tue Dec 22, 2015 7:07 pm

Re: s510 xtra fac accuracy issues

Fri Apr 29, 2016 4:54 pm

Blackbaronfish wrote:
Roger5 wrote:You don't have to shoot it down to get all of the air out of cylinder, just crack gauge mount bolt and undo slowly until gauge says empty, simples Rog

Not advisable in my book :shock:

BBF


It always worried me too about air in the cylinder, but check out the official Air Arms advice at this link.

https://www.youtube.com/watch?v=1aPigJo ... H&index=25

Post Reply

Who is online

Users browsing this forum: No registered users and 59 guests