Air Arms Owners Club

Hi guys I was wondering if anyone has come across this I accidentally spilt some super glue on my S400 stock after doing a job. I have tried turps got water and do not know what I can do to get this of without a light sand. I do not want to have to go down that road has I might not be able to get the right stain or varnish so I was hoping someone might have a clue how to resolve this without going down that road. So I would appreciate any help of you guys can give on this thx.✌

Look on ebay for superglue remover.

http://www.ebay.co.uk/sch/i.html?_from= ... r&_sacat=0

Whichever way you do it, it will not go back to a decent finish without re-finishing. You might as well get the glue off, take off the factory finish and re do the lot in good CCL or other oiled finish.

It may sound daft but you could try rubbing the effected area with acetone (nail varnish remover) on a cotton bud. I am not 100% sure what it will do to the finish on the stock though.
Acetone will desolve superglue but dont know the effects it will have on the stock.
Kevin
Ps let us know if you do succeed in removing it.

Thx For the advice guys i will try them and see if it sorts it out thankyou for your comments much appreciated

Put some superglue on a spare bit of wood and see what will get it off.

BBF

angle grinder

Did you ever get the superglue off the stock
Kevin

Thx for the replys guys went on eBay and bought some ever build 2 super glue remover worked great took all what I had spilt off within a couple of minutes so now sorted so thanks again.