Page 1 of 1
Air Arms S200 Conversions
Posted: Wed Jul 08, 2015 5:08 pm
by maddoghutty
Hi guys i have finally got my s200 sorted out and its now firing fine depending on the pellets i use firing between 10.5 to 12.0 ftlbs string but what i would like to know if anyone has converted a s200 to have a regulator/manometer on air cylinder like image here
if anyone has could you please point me in the right direction. I know there is the xtx regulator conversion but that does not give you the manometer at the end, that is the desired effect i am after so you know exactly how much air you have left in your cylinder.Also where to get the large air cylinder for the S200
Re: Air Arms S200 Conversions
Posted: Mon Aug 24, 2015 6:25 pm
by maddoghutty
Hi guys I have just bought the extra long cylinder with manometer at the end from a & m gun smiths for my AA S 200 but there wher no instructuctions on how to fill once fitted to rifle could any one please give me any in sight on how I can refill this with my stirrup pump once fitted to rifle or any other way it can be done. That is If anyone has had the same experiences, I am having at the moment could you please share with pictures or video on how you sorted this issue out it would be most appreciated. Has I thought once buying the cylinder it would be a straight forward issue of reconnecting the cylinder and still be able to use the quick fill I really hope someone can help has I am at a loss Wright now has they are now on holiday for 2 weeks so basically I am pulling my hair out in dire straights hope some one has been through the same issue and knows what to do thank you to you guys or girls in advance.
Re: Air Arms S200 Conversions
Posted: Mon Aug 24, 2015 6:52 pm
by daverobson
It looks like you're going to need the S200 cylinder fill adaptor.
http://www.airgunbuyer.com/details.asp? ... oduct=3980This screws into a dive bottle & the S200 cylinder screws directly into the adaptor.
I'm not sure how to use a stirrup pump with it though.
A&M Gunsmiths could have fitted a quick fill unit to the cylinder for you.
The other option could be to fit an Altaros quick fill unit to the cylinder behind the pressure gauge.
http://www.altaros.cz/en/air-arms/24-aa ... ot-includehttps://www.youtube.com/watch?v=5M4axnn12IE