Page 1 of 2
Ping noise
Posted: Mon Jun 01, 2015 11:03 pm
by Hairybiker59
Has I'm sure your aware you get a ping type noise coming from the s400/410 upon firing,is this noise coming from the spring or the cyclinder?
Re: Ting noise
Posted: Mon Jun 01, 2015 11:59 pm
by kevingambrell
I'm told its resonance in the air chamber, and can be cured by fitting a de-pinger in the air cylinder. I lost most of the firing noise on my s410 after I removed the machining marks from the hammer rail and put a stainless steel hammer spring in.
I'm sure the air chamber amplifies the noise and the delrin de-pinger will have some effect but I don't think its the complete answer.
One thing I will be trying is replacing the oillite bushes in the hammer striker with PTFE bushes.
Re: Ting noise
Posted: Tue Jun 02, 2015 7:15 pm
by Phil B
Are you sure its a Ting and not a Ping??
Re: Ting noise
Posted: Wed Jun 03, 2015 8:57 pm
by Raj
It is a Jamaican gun, innit?
Re: Ting noise
Posted: Thu Jun 04, 2015 9:41 pm
by air gun
Re: Ting noise
Posted: Thu Jun 04, 2015 11:50 pm
by Hairybiker59
Phil B wrote:Are you sure its a Ting and not a Ping??
Yeah ping noise
Re: Ting noise
Posted: Thu Jun 04, 2015 11:50 pm
by Hairybiker59
Possibly lol
Re: Ting noise
Posted: Fri Jun 05, 2015 5:18 am
by Blackbaronfish
I think the noise is
some ting in the barrel
BBF
Re: Ting noise
Posted: Fri Jun 05, 2015 6:18 pm
by Raj
Blackbaronfish wrote:I think the noise is
some ting in the barrel
BBF
Yeah mon
Re: Ting noise
Posted: Fri Jun 05, 2015 7:37 pm
by VEG
i think there is some ting wrong with it
