CZ 200 with Altaros regulator?

[doninva]

I live in the US so no restrictions on FPE. My CZ absolutely hates AA and JSB 8.4s and Crosman 7.9 pellets. It loves the AA 10.3s. I weigh, clean and lube with Kyteck. It is set up at 840 FPS and I'm getting 48 shots at 3%. The regulator was set at 150 bar from Altaros and I have not adjusted it. When setting up, I could run the hammer spring adjustment(that anti thing was a pain) in or out and no change in FPS with the 2mm strangle screw all the way out. I just ran the strange screw in till I got 840 FPS. Is this an indication I need to adjust the regulator. I would like to get a few more shots, like 12-15 . Any ideas would be appreciated. Thanks, Don

[Raj]

You are doing well getting 48 shots at 840 fps. It is a tiny cylinder and doesn't have much air in it !

[carnivore]

I live in the US so no restrictions on FPE. My CZ absolutely hates AA and JSB 8.4s and Crosman 7.9 pellets. It loves the AA 10.3s. I weigh, clean and lube with Kyteck. It is set up at 840 FPS and I'm getting 48 shots at 3%. The regulator was set at 150 bar from Altaros and I have not adjusted it. When setting up, I could run the hammer spring adjustment(that anti thing was a pain) in or out and no change in FPS with the 2mm strangle screw all the way out. I just ran the strange screw in till I got 840 FPS. Is this an indication I need to adjust the regulator. I would like to get a few more shots, like 12-15 . Any ideas would be appreciated. Thanks, Don

Is this a typo? Did you mean you're getting 4 to 8 shots and want to increase to 12 to 15? 10.3 gr @ 840fps is over 16fpe! i doubt that the S200 cylinder could do 48 shots at that power.

[doninva]

Yes I'm getting 48 shots at 3% with 10.3 AA pellets. My gun has the 16" tube. I was getting 46 shots with the standard tube at 825 FPS. The Altaros regulator works great in the S200. Don