charging your rifle
charging your rifle
i was told by my local RFD,it's best to charge your rifle using a cylinder rather than a stirrup pump as the air's cleaner,i have 2 cylinder's of which both are out of tests,i have a hills pump with a DRY PACK fitted,surely this would be ok to use.i always make certain the charging adapter is clean prior too use.due to certain circumstances i cant get the cylinders tested.
Re: charging your rifle
Personally, I would only use a bottle, but the hills is probably the best pump,especially with the Dry Pack fitted,
You'll be ok, but get your bottles sorted, and use the pump as a back up
You'll be ok, but get your bottles sorted, and use the pump as a back up
- Blackbaronfish
- Posts: 3691
- Joined: Sun Feb 15, 2015 6:20 pm
- Location: Nuneaton
Re: charging your rifle
If you use your pump indoors there would be minimum moisture. Using a dry pack will reduce to almost nil.
I used a bog standard pump (before dry packs came out) for over a year and when looking in the cylinder there was not rust whatsoever.
I’m sure you will be able to see the advantages of using the pump to keep fit whilst in lockdown
Stay safe
BBF
I used a bog standard pump (before dry packs came out) for over a year and when looking in the cylinder there was not rust whatsoever.
I’m sure you will be able to see the advantages of using the pump to keep fit whilst in lockdown
Stay safe
BBF
Did I mention that I'm the only one to have attended EVERY meet since we started
Re: charging your rifle
I've used pumps for years and not had issues with corrosion. I possibly had a contamination issue where a fill valve leaked slowly a couple of times but then sealed on the next fill. A bottle is preferable but if, like me, there is nowhere nearby to get refills you might need to use a pump regularly anyway.
Regarding the Hills dry pack, it doesn't stop moisture at the pump outlet. Even if the dry pack removes 90% of the water in the air at the intake (which is what the Hills data represents - and even this is doubtful with the short residence time) there will still be condensation in the pump. You can confirm this by looking up dew point tables; you will find that air at 200bar will only hold a minute fraction of the water in air at room temperature. The only effective method of eliminating condensation is to have a 300bar dry pack on the pump outlet, which is what you do with any decent compressor.
Regarding the Hills dry pack, it doesn't stop moisture at the pump outlet. Even if the dry pack removes 90% of the water in the air at the intake (which is what the Hills data represents - and even this is doubtful with the short residence time) there will still be condensation in the pump. You can confirm this by looking up dew point tables; you will find that air at 200bar will only hold a minute fraction of the water in air at room temperature. The only effective method of eliminating condensation is to have a 300bar dry pack on the pump outlet, which is what you do with any decent compressor.
- redhotsheep
- Posts: 2
- Joined: Tue May 12, 2020 6:06 am
Re: charging your rifle
How long does it take to pump up an average PCP with hand pump?
Re: charging your rifle
It all depends on how fit you are, between 5 to 10 minredhotsheep wrote: ↑Tue May 12, 2020 6:14 amHow long does it take to pump up an average PCP with hand pump?

IS MY SIGNATURE BIGGER THAN RAYS. Cz 452 american .22+sak mod
S200. .177
S200. .177
Who is online
Users browsing this forum: No registered users and 117 guests