S300 trigger help please

[Peddy]

I've finally got my first AA pcp, was going to try get an early s200 but a lovely s300 came up at right money. First impression is what a well made gun. But the trigger has me baffled. Had a look inside and mine is the 2sear trigger, I find the 1st stage too long and 2nd a big light. When I adjust as per manual i end up with a creepy unpredictable mess. I can only get OK by having a very long 1st and very light 2nd, is this right. I'm thinking I'm inexpecting too much for a 20 yr old design? Also any ideas for giving the uncocked trigger some Spring tension, never had a floppy trigger before!!!! Any comments would be appreciated

[TenMetrePeter]

The S300 and 310 don't seem to appear in the forum much, but from the parts diagrams the 2 sear trigger seems to be the same design as the S400 early and very similar to the latest 3 sear design.
I made this "reset" video for the 3 sear system but it should work for yours.
https://youtu.be/80CMGEDpWmc

The internals of the latest three sear system are shown here but imagine it without the little one.
https://youtu.be/2ge3cfq1AOQ

I would not worry about the floppy trigger. It is normal and unless you have a problem scaring prey as you jog through the undergrowth it isn't normally a problem. The long first stage is a safety feature in my book and if you decide not to fire, releasing it will reinstate the full sear engagement.

[143granville]

as peter said long first stage is a good safety .
nice gun the 300 guy where I worked had one .

[Teggwynn]

I’v not long got myself a s300, mine doesnt seem to have a 1st stage at all, more like a top notch set trigger. Boy oh boy its a sweet trigger though

[TenMetrePeter]

I’v not long got myself a s300, mine doesnt seem to have a 1st stage at all, more like a top notch set trigger. Boy oh boy its a sweet trigger though

They can be set thst way. I just worry about it being permanently a hair way from release.