FX Handpump, 3-stage (bought new, used twice to check it) + tube and extra moisture absorber... £120
Logun cleaning kit in zip case (bought new, used maybe twice) ... £10
Pellets including a set of 5 different size tubs, all tins are almost full (air bullets unused) ... £12
SOLD S410, 2 magazines, both stocks, D&R sight, bipod, case ... £400
SOLD Combro Chronoscope CB625 mk4 (bought new, used a few times) ... £40
Please drop me a pm if I'm far out on prices, or to haggle. Face to face for the gun and tank, obviously, other stuff I can post at cost.
Some pictures are below; please go to this link to see more high resolution images of everything. Just click on an image name to view it.
http://lord-fox.net/S410/
For my sins I live in Bacup, Rossendale.
![Image](http://lord-fox.net/S410/DSC_0107a.jpg)
![Image](http://lord-fox.net/S410/DSC_0114a.jpg)
![Image](http://lord-fox.net/S410/DSC_0091a.jpg)
Full disclosure: this needs a new male fill valve. It has a slow leak at the valve's ball. I have replaced the pressure gauge with a new one (bought a few days ago from Julian) because that had a leak inside it, enough to hide the much lighter leak on the valve. I also replaced the seals on the gauge block for good measure and that's all air-tight now. I'm only sorting it out to sell it, so given that I now need to replace another part, I thought I might as well sell it to someone with better tools and experience than me...
The rifle functions and fires just fine, but loses pressure slowly.
I bought the rifle from a British Blades forum member about seven years ago, along with the air tank and fittings. He had had it from new and iirc he had fired about 4 tins/2000 pellets. I have hardly used the rifle at all (not even half a tin) due to change in circumstances. It has not been used at all for four years, and worked perfectly when I packed it away then. It leaked when I got it out to check it over for selling. Typical, lol.
When I last chrono'd the rifle, it was just under 12 ft/lbs and it shot beautifully. It is pre-AT
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
There is a very nice stock fitted, with a removable bipod. The stock has a few marks from use. Also the original stock (which has some scuffs) is included. The bolt is brass and a brass screw-type silencer adapter is fitted (with a screw-on silencer). There is very slight rusting of outside of the barrel; hardly noticeable speckles but it's there. Sight is Dowling and Rowe 4-12x50, with a flip-up yellow filter. It's a nice 'scope!
I've split things up for pricing, but 'twould be much easier if someone wants it all of course (and cheaper
![Wink ;)](./images/smilies/icon_e_wink.gif)