noisy s410

no avatar
tonyc
Posts: 376
Joined: Mon May 29, 2017 10:55 am

Re: noisy s410

Wed Feb 10, 2021 11:11 pm

Is it the report from the barrel that's noisy, or is it from the action, or is it a ping from the cylinder?
Have you checked the power? Well over or well under spec. I can't see this having anything to do with seals except perhaps a bad leak from the breech seal, which should be easy to detect.
Comparing with the your S400 you would expect the .177 to be noisier than a .22 with the same barrel length.
Is the .22 carbine and the .177 full length? Carbine will be noisier at same power.

no avatar
nipper
Posts: 8
Joined: Thu Jan 28, 2021 8:17 pm

Re: noisy s410

Thu Feb 11, 2021 7:10 am

thanks for the reply tony c they are both carbines if I get time over the weekend work permitting will borrow a chronograph off a mate and fire some shots off and get back to you once again thanks for the advice

no avatar
Outandabout
Posts: 723
Joined: Tue Feb 17, 2015 8:13 pm
Location: Bishop Auckland Co Durham

Re: noisy s410

Thu Feb 11, 2021 12:30 pm

If you do decide to do it yourself-its not that hard. There are some some good strip down guides on YouTube that I followed to do mine, the 1st time i did it.
1 thing i should have done to make it A little bit easier was to take photograph at each step to remind me how it goes back together HA HA.
Kevin

Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests