Page 1 of 2

Over fill of air

Posted: Sat Aug 04, 2018 3:03 pm
by June
I have just bought a S510 new from the CLA game fair. I have just tried to kill 6 rabbits within 15 yards and the pellets bounced off them !!
On checking the air pressure I found it to be at maximum 250 bar
In One part of the handbook it says max of 190 and in another 100 to 110
Can anyone let me know what it should be and I have just shot off the empty cylinder to just under 200
Hope someone can assist

Re: Over fill of air

Posted: Sat Aug 04, 2018 4:44 pm
by Roger5
June wrote: ā†‘
Sat Aug 04, 2018 3:03 pm
I have just bought a S510 new from the CLA game fair. I have just tried to kill 6 rabbits within 15 yards and the pellets bounced off them !!
On checking the air pressure I found it to be at maximum 250 bar
In One part of the handbook it says max of 190 and in another 100 to 110
Can anyone let me know what it should be and I have just shot off the empty cylinder to just under 200
Hope someone can assist
190 is recommended max fill pressure, most people in the Know would only fill to 165/170 and shoot it down to about 100bar. Hope that helps. Rog

Re: Over fill of air

Posted: Sat Aug 04, 2018 7:56 pm
by long jon
HI
yes as Roger says most fill it to say 190 or 180. This is likely to be the start of your sweet spot. And probably go down to 90, which will be about where the sweet spot falls off - assuming your gun is unregulated. Filling beyond these settings is of little value in terms of consistency.
Beg, borrow or steal a chronograph and check your fps and make a record. You will then know the sweet spot for your own gun and can fill accordingly.I have just done this for my S400 superlight and I do not go beyond 180 to 190 and refill at 90 to 100.

Firing and measuring your guns specific characteristics was fascinating and not a chore.

long jon

PS Guys this is my first piece of advice to another member. I am pretty sure it is sound but do cut in early if I have it wrong,

Re: Over fill of air

Posted: Sat Aug 04, 2018 8:00 pm
by long jon
whoops Roger said 165/170 not 190 - sorry R. He knows more than me. Best to do your own test just for the fun if nothing else.
Jon

Re: Over fill of air

Posted: Sat Aug 04, 2018 8:07 pm
by Blackbaronfish
A chrono is indeed needed as well as a swift kick up of the pants
Why would you carry on shooting at live quarry knowing they were bouncing off... your words speak volume.
I would get to know the ins and outs of the rifle before you go any further.

BBF

Re: Over fill of air

Posted: Sat Aug 04, 2018 8:33 pm
by 143granville
250 bar would drop the power quite a lot I would have though .
chrono is the way to go .
plus good target to practice on .
by the way welcome .

Re: Over fill of air

Posted: Sun Aug 05, 2018 7:20 am
by Roger5
Love it, Swift kick up the arse, and a welcome at the same time :lol:

Re: Over fill of air

Posted: Sun Aug 05, 2018 8:11 am
by TenMetrePeter
Nobody mentioned that 250 bar is close to deploying the self-destruct system in a S series cylinder. Not to mention maxing out the gauge.
Funny but I check the gauge before setting out on a shoot, not after trying to kill something.

Re: Over fill of air

Posted: Sun Aug 05, 2018 8:17 am
by Blackbaronfish
Roger5 wrote: ā†‘
Sun Aug 05, 2018 7:20 am
Love it, Swift kick up the arse, and a welcome at the same time :lol:
Iā€™m sure the op will see his errors. As a shooting community we must be firm.
Having said that we must also help this guy as he has at least asked for help.
Now we can move forwards 8-)
Welcome to the AAOC

BBF

Re: Over fill of air

Posted: Sun Aug 05, 2018 10:55 am
by eboswan
WE all had too learn and it's a mistake he wont make again :)
Welcome by the way :D