Page 1 of 1

s510 silencer thread removal

Posted: Thu Nov 23, 2017 10:30 pm
by theclot67
part number s133.
is it possible to remove shroud insert( silencer thread ) from baffle tube as mine has stripped. is it threaded and glued or machine fit and glued. part listed as separate so expect it can be removed ?. any help apprieciated .

Re: s510 silencer thread removal

Posted: Fri Nov 24, 2017 8:15 am
by Roger5
Never had to remove one myself, but imagine it will be loctited in, you would have to use a bit of heat to remove it. Rog

Re: s510 silencer thread removal

Posted: Fri Nov 24, 2017 8:46 am
by bgaltd
its threaded so you'll need to apply a little heat then unscrew it :-) . you could cut across the top so you can put a coin or something across it to help unscrew it .