Page 1 of 1

TX200 Mk3 protective stock sleeve

Posted: Sun Oct 01, 2017 11:52 am
by Scouse8108
Afternoon all.

So... New to the site & this is my first post.

I recently bought a tx200 and have decided that the stock is just too nice to risk damaging/scratching.

Does anyone know somewhere to get a protective sleeve to fit the stock?

Regards

Re: TX200 Mk3 protective stock sleeve

Posted: Sun Oct 01, 2017 1:30 pm
by eboswan
Hello and welcome :)
You could buy something like this.'

https://www.amazon.co.uk/sock-Realtree- ... rds=rifle+


You can use camo tape on a roll but it would not be my first choice as you can't see what is going on underneath it with out taking it off.

Or look out for a tatty stock and swap them over and put the nice one away.

Re: TX200 Mk3 protective stock sleeve

Posted: Sun Oct 01, 2017 6:06 pm
by Scouse8108
I'd thought about sniper tape but decided against it due to the residue it would leave.

The sock looks ok for storage but not for actual use.

Thanks though.

Regards

Re: TX200 Mk3 protective stock sleeve

Posted: Sun Oct 01, 2017 6:10 pm
by eboswan
I guess an old tatty stock is the way to go then, the problem with tape is it can trap moisture and cause unseen problems.

Re: TX200 Mk3 protective stock sleeve

Posted: Sun Oct 01, 2017 6:46 pm
by Scouse8108
I've found a local who is going to custom make a removable neoprene sleeve to fit the stock.

Re: TX200 Mk3 protective stock sleeve

Posted: Sun Oct 01, 2017 7:30 pm
by eboswan
Sorted :D