Grub Screw in the TX200 Chamber

no avatar
Barnydaddy
Posts: 22
Joined: Sat Feb 21, 2015 3:17 am

Grub Screw in the TX200 Chamber

Mon Dec 24, 2018 3:21 pm

It appears to me that there is a screw protruding into the chamber of my TX200.
It looks like the purpose is to prevent the barrel nut from loosening.
I do not see this screw on the parts list.
I have tried to remove the screw with a dental pick, thinking it might be a pellet.
The threads, on whatever it is, are clearly visible.
I never shot Beeman Silver Jets in the TX and the pellets I shoot donot have multiple ribs.
The rifle is shooting superbly.
Thanks for your help.

no avatar
FPoole
Posts: 339
Joined: Mon Feb 16, 2015 2:37 am

Re: Grub Screw in the TX200 Chamber

Tue Dec 25, 2018 4:11 pm

It's the tip of the screw that holds the front stock bracket to the receiver. With the stock off, it's the little aluminum piece that the forward 2 stock screws go into. It can loosen over time and cause accuracy to fall off pretty badly. I always remove it, clean the threads and the hole, and add some blue Loctite to the threads and snug up tight. This keeps it from loosening and gives you one less thing to worry about.

no avatar
Barnydaddy
Posts: 22
Joined: Sat Feb 21, 2015 3:17 am

Re: Grub Screw in the TX200 Chamber

Tue Dec 25, 2018 9:22 pm

Mr. Poole...You are 100% correct.
I discovered that very same thing not five minutes ago.
Thanks for your reply and have a very Merry Christmas and a Happy New Year.
Frank

Fairfield, California, USA

no avatar
pelletcaster
Posts: 80
Joined: Mon Feb 16, 2015 10:07 pm
Location: Carinthia / Austria

Re: Grub Screw in the TX200 Chamber

Wed Dec 26, 2018 11:51 am

As a proud owner of a TX200 HC .177 this was new to me and I'll take care next time when detaching the stock.
Thanks to TPoole for his advice.

I checked my technical documentation.
The manual shows this screw as item 13 / part no. TX416 "M5x10 SOC C/SUNK".

If you need a spare in GB look here (generally I'm wondering about the prices charged so differently :? :roll: )

at Julian Bond
https://www.airarmsspares.com/air-arms-spares/
TX416 M5 X 10 SKT CSK - STOCK BRACKET FIXING SCREW (GBP 0.46)

John Knibbs
TX200 Bracket Screw Part No. TX416 / Part Number: TX416 (GBP 1.50)
http://www.airgunspares.com/store/produ ... No.-TX416/

Chambers
https://www.gunspares.co.uk/products/24 ... r-Carbine/
C1047 Stock bracket screw (GBP 3.64)


USA shooter friends may have a look here
Item Code: AAP-TX416 [PY-A-4076] (USD 4.95)
https://www.pyramydair.com/s/a/Air_Arms ... TX200/4076

Seasons Greetings
and happy shooting
Live is a journey - not a destination.
-----------------------------------------
AA TX200 HC / LGU Master / LGV-CU / HW35 / HW50s (1974) / HW50S (2015) / HW90 / DIANA 34 T01
DS MK4iS-S / SPA P-12 / CZ200S-Green

no avatar
Barnydaddy
Posts: 22
Joined: Sat Feb 21, 2015 3:17 am

Re: Grub Screw in the TX200 Chamber

Wed Dec 26, 2018 2:11 pm

Thank you :D

Post Reply

Who is online

Users browsing this forum: No registered users and 31 guests