Tx200 .22 spring

no avatar
bionicactionman
Posts: 16
Joined: Tue Mar 24, 2015 9:10 pm

Tx200 .22 spring

Fri Jun 01, 2018 7:14 pm

Hi folks does anybody know the original spring length that's in a tx200 hc .22 as I got a drop in kit with a spring included and it turns out to be 65mm longer than the one in the gun giving 70mm of pre-load which just seem right some how 😱😱 any advice would be great. Cheers
an air gun is for life not just for christmas

no avatar
sussexa
Posts: 12
Joined: Sun May 06, 2018 6:55 pm

Re: Tx200 .22 spring

Sat Jun 02, 2018 8:16 pm

i just did a tbt short stroke kit and if you go to 1.29 in my vid here you will see side by side old and new spring.
supprisingly wuth a bit of sweat it went in.
after a few rounds of testing it came out a fair bit shorter than when it went in and last time i had it out to play with trigger it was barely an inch or less of mild preload to get back together.
its very consistent with weighed pellets. fast lock time .just put a vid up today of view through scope, idea of recoil wasnt intention just playing with a cheap crash cam.at 10m
https://www.youtube.com/watch?v=rLWTlaoM4CU&t=4s
and
https://www.youtube.com/watch?v=IYdko30TNsM
https://www.youtube.com/watch?v=cnqluENIM2w
ps couldnt see the cross hairs in the crash cam screen such a small picture, surprised by the footage were actually good shots.
just groups not bothered to zero scope each distance before anyone says sights are off

Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests