EV2 mk 4 barrel diameter

no avatar
baron
Posts: 3
Joined: Tue Mar 03, 2015 8:36 pm

EV2 mk 4 barrel diameter

Tue Oct 26, 2021 4:32 pm

I have just bought a new nickel plated barrel for my AA EV2 mk4 (the same barrel should also fit the MPR, the FTP900 and HFT 500)

I asked for a Lother Walther part number E112N and the packaging/labeling on the barrel clearly says E112N which is correct for a nickel plated 14 mm OD barrel to fit the mk2, 3 and 4 EV2

The barrel is the correct length and takes the internal breech seal.

However it is 15.5 mm diameter over most of its length and it will not fit the breech block of the EV2 (or my MPR) and will need machining down in diameter a couple of mm to fit.


I know the mk 1 EV2 had a slightly larger diameter barrel (15mm if my memory serves me right) but it was blued and not nickel plated and not made by Lother Walther.

Has anyone any idea what rifle this 15.5 mm barrel is made for. Clearly not an EV2.
john

Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests