TDR
Posted: Sat Dec 28, 2019 5:09 pm
The TDR has locating pins which push into the rear of the hammer housing/chassis assembly. The user handbook
States KS531 but on Julian's site, it says KS530 There appears to be 2 sizes. On my .22 the pins are shorter, I've
Checked them against a .177 and they are definitely shorter, can only think it's to do with calibre, i.e. Air usage, with the
.177 needing more air than the .22, so basically, less pressure on the hammer spring needed for .22 any ideas. Rog
States KS531 but on Julian's site, it says KS530 There appears to be 2 sizes. On my .22 the pins are shorter, I've
Checked them against a .177 and they are definitely shorter, can only think it's to do with calibre, i.e. Air usage, with the
.177 needing more air than the .22, so basically, less pressure on the hammer spring needed for .22 any ideas. Rog