Air Arms Owners Club

Hi guys,
Would appreciate your advice. I just bought a 2010 S410 with some “extra bits” in a bag ...

https://postimg.cc/gallery/1cxog5vsm/

Is that evidence of the anti tamper been removed and is the hex screw the power adjust ?

Thanks, Mike

They look like the A/T plugs. If new ones have been fitted you’ll see them under the action if you take it out the stock.
Power screw should be black steel m3 pointed hex-socket grub screw (1.5mm allen key)

Is that brass one out of the firing pot, guys?

The brass one looks like a fill line restricter, and nothing to do with the actual rifle, and all the rest, are as Pete says anti tamper plugs.

Thanks guys. I’ve found the adjuster. No anti tamper, just an Allen bolt and o-ring covering the adjuster screw on the right hand side. Fill line restricter ?

mikehill wrote: ↑

Fri Jun 28, 2019 10:08 pm

Thanks guys. I’ve found the adjuster. No anti tamper, just an Allen bolt and o-ring covering the adjuster screw on the right hand side. Fill line restricter ?

Fill line restricter, slows down air from your bottle when filling

Thanks Roger, where should it be, just so I can check it’s not missing. I have a slow Jubilee valve on my bottle but would like to be sure.

Here’s a pic of the fill valve

mikehill wrote: ↑

Sat Jun 29, 2019 2:42 pm

Here’s a pic of the fill valve

Hi Mike, it's not on the rifle filler, it would be in the whip from the bottle, I wouldn't worry about it. Rog

Thanks Rog, much appreciated all.