Have I got anti tamper ?

[mikehill]

Hi guys,
Would appreciate your advice. I just bought a 2010 S410 with some “extra bits” in a bag ...

https://postimg.cc/gallery/1cxog5vsm/

Is that evidence of the anti tamper been removed and is the hex screw the power adjust ?

Thanks, Mike

[TenMetrePeter]

They look like the A/T plugs. If new ones have been fitted you’ll see them under the action if you take it out the stock.
Power screw should be black steel m3 pointed hex-socket grub screw (1.5mm allen key)

Is that brass one out of the firing pot, guys?

[Roger5]

The brass one looks like a fill line restricter, and nothing to do with the actual rifle, and all the rest, are as Pete says anti tamper plugs.

[mikehill]

Thanks guys. I’ve found the adjuster. No anti tamper, just an Allen bolt and o-ring covering the adjuster screw on the right hand side. Fill line restricter ?

[Roger5]

Thanks guys. I’ve found the adjuster. No anti tamper, just an Allen bolt and o-ring covering the adjuster screw on the right hand side. Fill line restricter ?

Fill line restricter, slows down air from your bottle when filling

[mikehill]

Thanks Roger, where should it be, just so I can check it’s not missing. I have a slow Jubilee valve on my bottle but would like to be sure.

[mikehill]

Here’s a pic of the fill valve

[Roger5]

Here’s a pic of the fill valve

Hi Mike, it's not on the rifle filler, it would be in the whip from the bottle, I wouldn't worry about it. Rog

[mikehill]

Thanks Rog, much appreciated all.