S200 hunter cylinder length

no avatar
Pete2
Posts: 46
Joined: Sun Nov 11, 2018 9:15 pm

S200 hunter cylinder length

Fri Nov 16, 2018 7:44 am

I've got myself an s200 which I have fitted an xtx pressure gauge with quick fill and their external regulator to the original cylinder. Works well however, not being one to not tinker if there is another option, I am thinking of getting the hunter cylinder to fit.
Its the one that is a bit longer and so holds more air.
Has anyone got one?
What length are they?
Just wondering if there is enough room behind the suppressor to get the external reg, quick fill/pressure gauge and a longer cylinder.
Ta

no avatar
Y-Geo
Posts: 17
Joined: Fri Dec 28, 2018 12:15 am

Re: S200 hunter cylinder length

Fri Dec 28, 2018 7:19 pm

Hi,
Look up ALTAROS on the web for titanium long cylinders (0.15Ltr as opposed to standard 0.13Ltr ) for the S200.

It will just fit behind the moderator if you fit external reg, Quick fill with guage , however if you need to fit it or take it off for service you will have to remove the moderator first.

You can just buy the actual tube and add your end caps yourself 8-)

S & F
Y-Geo

no avatar
pelletcaster
Posts: 80
Joined: Mon Feb 16, 2015 10:07 pm
Location: Carinthia / Austria

Re: S200 hunter cylinder length

Sat Dec 29, 2018 12:01 pm

I've a CZ200S .177 Green and AFAIK it originally has the Hunter-cylinder.
I measured 380 mm just for the STEEL tube without the brass on both ends.

Hope this is helpful.
Live is a journey - not a destination.
-----------------------------------------
AA TX200 HC / LGU Master / LGV-CU / HW35 / HW50s (1974) / HW50S (2015) / HW90 / DIANA 34 T01
DS MK4iS-S / SPA P-12 / CZ200S-Green

no avatar
Pete2
Posts: 46
Joined: Sun Nov 11, 2018 9:15 pm

Re: S200 hunter cylinder length

Mon Dec 31, 2018 10:30 pm

Thanks guys.

Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests