Page 1 of 1
510 US barrel shroud.
Posted: Thu Jul 05, 2018 3:24 pm
by The Burpster
Is it held on with some sort of thread lock?
Got a lovely new Rowan shroud and 1/2”adapter and it won’t budge easily. Do I need to remove the breech block and heat up the shroud to get it to release?
Re: 510 US barrel shroud.
Posted: Thu Jul 05, 2018 4:16 pm
by Roger5
The Burpster wrote: ↑Thu Jul 05, 2018 3:24 pm
Is it held on with some sort of thread lock?
Got a lovely new Rowan shroud and 1/2”adapter and it won’t budge easily. Do I need to remove the breech block and heat up the shroud to get it to release?
Yes, it's loctited, and yes, best to remove bolt housing, bit of heat should do the trick. Rog
Re: 510 US barrel shroud.
Posted: Thu Jul 05, 2018 4:21 pm
by The Burpster
Thank you Rog. Loctite on that thread seems a bit of overkill to me.
will get some tools out tomoz and give some!
Re: 510 US barrel shroud.
Posted: Thu Jul 05, 2018 5:42 pm
by Blackbaronfish
No hammer though
BBF
Re: 510 US barrel shroud.
Posted: Thu Jul 05, 2018 8:03 pm
by The Burpster
Not even a teeny weeny hammer?
Re: 510 US barrel shroud.
Posted: Thu Jul 05, 2018 8:10 pm
by Blackbaronfish
Re: 510 US barrel shroud.
Posted: Thu Jul 05, 2018 8:53 pm
by The Burpster
Re: 510 US barrel shroud.
Posted: Sat Jul 07, 2018 11:29 am
by The Burpster
Shroud removed, lovely shiny new Rowan engineering shroud and 1/2” adapter fitted
Re: 510 US barrel shroud.
Posted: Sat Jul 07, 2018 4:06 pm
by Blackbaronfish
The Rowan boys make some lovely stuff
BBF
Re: 510 US barrel shroud.
Posted: Sat Jul 07, 2018 8:56 pm
by The Burpster
Yes they do.
