Air Arms Owners Club

My late 2016 PS has its cocking underlever off the one side in the “home” slot under the fore end.

I know it’s been stripped as there’s a Tin Bum kit in it.

What adjustments are there to sort it and centralise the cocking arm?

Thanks

AFAIK you can buy a new cocking arm, Julian Bond, etc....?

It can be adjusted but it means a bit of wood removal and packing on the stock. Unless it's rubbing badly I wouldn't bother.

Also caused by main pin holding the lever to the bear trap mechanism block being slightly off centre in the bushings, as I found out when rebuilding mine after a respray.