Prosport cocking lever

no avatar
arramattic
Posts: 6
Joined: Sun Mar 04, 2018 9:25 pm

Prosport cocking lever

Sat Mar 24, 2018 8:11 am

My late 2016 PS has its cocking underlever off the one side in the “home” slot under the fore end.

I know it’s been stripped as there’s a Tin Bum kit in it.

What adjustments are there to sort it and centralise the cocking arm?

Thanks
Non Sufficit Orbis

S200 MkIII, regged and bonnied up, TbT tuned and customised Prosport, TbT tunedTX200HC

User avatar
pjgtech
Posts: 63
Joined: Sun May 07, 2017 5:06 pm

Re: Prosport cocking lever

Sun Jul 08, 2018 5:42 pm

AFAIK you can buy a new cocking arm, Julian Bond, etc....?
pjgtech: BASC: SMK S2 Pistol .177
Air Arms ProSport .177 (Tuned):
Air Arms S410 TDR .177:
Kral NP-02 .177:
Umarex Colt 1911 . 177:
Weihrauch HW 97KT. 22:(Tuned):
Weihrauch HW40 .177

User avatar
Timmytree
Posts: 969
Joined: Sun Feb 15, 2015 11:50 am

Re: Prosport cocking lever

Sun Jul 08, 2018 9:20 pm

It can be adjusted but it means a bit of wood removal and packing on the stock. Unless it's rubbing badly I wouldn't bother.

no avatar
Nicktanner
Posts: 2
Joined: Mon Dec 18, 2017 8:38 pm

Re: Prosport cocking lever

Mon Jul 09, 2018 12:45 pm

Also caused by main pin holding the lever to the bear trap mechanism block being slightly off centre in the bushings, as I found out when rebuilding mine after a respray.

Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests