AA Pro-Target MkIII regulator removal

User avatar
BSJ
Posts: 4
Joined: Wed Jan 31, 2018 2:11 pm

AA Pro-Target MkIII regulator removal

Thu Feb 01, 2018 6:24 pm

I think accidentally I just deleted my original post!

I need to remove the factory regulator from my recently re-acquired 1999 PT MkIII.

Can I just unscrew it from the action?

I don't want to apply a lot of torque to the reg. and then find there is a hidden set screw somewhere.

Are there any other gotchas hiding in there that I need to worry about.
Brian
Grand Isle, VT
.177 Pro-Target (1999)
.22 S410 (2000)

no avatar
sherlock1963
Posts: 40
Joined: Thu Jun 18, 2015 9:35 pm

Re: AA Pro-Target MkIII regulator removal

Thu Feb 01, 2018 11:55 pm

On my RN10 there is a 'locking tab' at the breech end which needs to be loosened/removed. As long as you have done that (and completely de-pressurised the cylinder) it just needs unscrewing.

They are often very tightly screwed in the breech block and cylinder.
Bullpup TX MK2- TX200SR- NJR100--TX MK1 TX MK3- Pro-Elite - RN10

User avatar
BSJ
Posts: 4
Joined: Wed Jan 31, 2018 2:11 pm

Re: AA Pro-Target MkIII regulator removal

Wed Feb 14, 2018 7:09 pm

Thanks,

Everything came off without a problem.
Brian
Grand Isle, VT
.177 Pro-Target (1999)
.22 S410 (2000)

Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests