S510 Barrel Tube Support

User avatar
gdavison
Posts: 366
Joined: Tue Feb 17, 2015 6:43 am
Location: Baughurst

Re: S510 Barrel Tube Support

Thu Aug 31, 2017 5:13 pm

Cheers to Rog pointing me in the direction of the correct size I bough a number of O rings around the 12 to 12.5 ID size

The first one I tried was 12.5 * 1.5 and it worked brilliantly

here is 10 shots

Image

TY Rog for all the help
AA FTP900, AA HFT500, AA S510, FWB-800FT

no avatar
John814ce

Re: S510 Barrel Tube Support

Sun Feb 17, 2019 8:37 pm

You probably in fact very more than likely split the o rings on the threads when pushing/forcing the barrel support out.

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: S510 Barrel Tube Support

Mon Feb 18, 2019 12:05 pm

John814ce wrote:
Sun Feb 17, 2019 8:37 pm
You probably in fact very more than likely split the o rings on the threads when pushing/forcing the barrel support out.
Or quite possibly, when it was pushed/forced in 8-)

no avatar
John814ce

Re: S510 Barrel Tube Support

Mon Feb 18, 2019 1:33 pm

Of course, but you would expect aa to have some sort of thin sleeve or something like that to aid it in and we'd hope that aa aren't just forcing them in. Btw it is more easily put in from the block end of the shroud than the baffle end. Its because of the lip inside the baffle end after the threads it makes it harder to keep the o rings in place. Are do what iv done and needle file the slots slightly wider on the aluminium support were the o rings sit and when the o rings are getting squashed into the tube it gives you a bit more to work with. But i agree with you post the barrel should be longer are similar to the ultimate sporter.

Post Reply

Who is online

Users browsing this forum: No registered users and 24 guests