marking magazine

User avatar
pjgtech
Posts: 50
Joined: Sun May 07, 2017 5:06 pm

marking magazine

Tue May 09, 2017 7:59 pm

Has anyone devised a way of marking the 10 shot magazine on the s410 to indicate when it empty or has only one or two shots left?
eg: putting a mark on the mag itself?
pjgtech: BASC Member: SMK Pistol: Cal.177
Air Arms S410 TDR:(PCP):Cal.177:Hawke Vantage 3-9x50
Weihrauch HW 97KT:(Underlever):Cal.22:(SFS Tuned):Hawke Vantage 3-9x50
Gamo Whisper IGT: Gas Ram):Cal.177:Gamo 3-9x40
SMK Victory CP2:(CO2):Cal.177:BSA scope

no avatar
Roger5
Posts: 596
Joined: Sat Jul 25, 2015 8:04 am

Re: marking magazine

Tue May 09, 2017 9:37 pm

pjgtech wrote:Has anyone devised a way of marking the 10 shot magazine on the s410 to indicate when it empty or has only one or two shots left?
eg: putting a mark on the mag itself?

I drill through the back of the mag, then you can see light coming through empty chambers, I also block one chamber off,which means I can't close the bolt when it gets to it. Rog

no avatar
Mark112
Posts: 210
Joined: Mon Feb 16, 2015 5:25 pm

Re: marking magazine

Wed May 10, 2017 5:26 pm

Hi,

One of the mag chambers has a red mark next to it.

Mark
S410C .177 Regged - MTC Viper 4-16 x 50
S410K .177 Regged - Hawke Nite-Eye 4-16 x 50 AO IR
S410K .22 - Hawke Sport HD 3-9 x 50 AO IR
Logun Mk1 .22 - AGS 3-9 x 40
Theoben Taunus .22 - Simmons 4-12 x 40 AO
BW1911R2
Walther CP99
Webley Premier .22

User avatar
pjgtech
Posts: 50
Joined: Sun May 07, 2017 5:06 pm

Re: marking magazine

Wed May 10, 2017 6:20 pm

Thanx for the tips...

Roger how big do you drill the holes, eg: drill bit size, couple of mm, etc? and what do you use to block one hole?
Not sure I want to block off one hole as that reduces shot count by one.

Mark, what did you use to put a red mark on the mag, eg: paint?

Thanx again... 8-)
pjgtech: BASC Member: SMK Pistol: Cal.177
Air Arms S410 TDR:(PCP):Cal.177:Hawke Vantage 3-9x50
Weihrauch HW 97KT:(Underlever):Cal.22:(SFS Tuned):Hawke Vantage 3-9x50
Gamo Whisper IGT: Gas Ram):Cal.177:Gamo 3-9x40
SMK Victory CP2:(CO2):Cal.177:BSA scope

no avatar
eboswan
Site Admin
Posts: 2546
Joined: Sun Feb 15, 2015 9:16 am
Location: swansea

Re: marking magazine

Wed May 10, 2017 7:07 pm

pjgtech wrote:Thanx for the tips...

Roger how big do you drill the holes, eg: drill bit size, couple of mm, etc? and what do you use to block one hole?
Not sure I want to block off one hole as that reduces shot count by one.

Mark, what did you use to put a red mark on the mag, eg: paint?

Thanx again... 8-)


The red mark is already on the mag.
IS MY SIGNATURE BIGGER THAN RAYS. Cz 452 american .22+sak mod
S200. .177

no avatar
143granville
Posts: 95
Joined: Mon Apr 03, 2017 8:15 pm
Location: barwell leicestershire .

Re: marking magazine

Wed May 10, 2017 8:17 pm

no pellets come out the barrel when shooting . :D :D :D

no avatar
Roger5
Posts: 596
Joined: Sat Jul 25, 2015 8:04 am

Re: marking magazine

Wed May 10, 2017 8:21 pm

pjgtech wrote:Thanx for the tips...

Roger how big do you drill the holes, eg: drill bit size, couple of mm, etc? and what do you use to block one hole?
Not sure I want to block off one hole as that reduces shot count by one.

Mark, what did you use to put a red mark on the mag, eg: paint?

Thanx again... 8-)

You only need a hole large enough to let a small amount of light through, don't make it that a pellet can fall through and I block one hole with a self tapping Allan grub/set screw, loads cheap off amazon, I do this so that I don't shoot just air at rabbits, no point putting the wind up them, is there, but if your just plinking or paper shooting, then of course there's no need. Rog

User avatar
pjgtech
Posts: 50
Joined: Sun May 07, 2017 5:06 pm

Re: marking magazine

Wed May 10, 2017 8:40 pm

eboswan wrote:The red mark is already on the mag.


Hmm, no mark on mine, see photo?

https://image.ibb.co/jO46t5/AAs410_TDR_mags.jpg
pjgtech: BASC Member: SMK Pistol: Cal.177
Air Arms S410 TDR:(PCP):Cal.177:Hawke Vantage 3-9x50
Weihrauch HW 97KT:(Underlever):Cal.22:(SFS Tuned):Hawke Vantage 3-9x50
Gamo Whisper IGT: Gas Ram):Cal.177:Gamo 3-9x40
SMK Victory CP2:(CO2):Cal.177:BSA scope

no avatar
eboswan
Site Admin
Posts: 2546
Joined: Sun Feb 15, 2015 9:16 am
Location: swansea

Re: marking magazine

Wed May 10, 2017 9:46 pm

Oh yea, that one must have been made the day aa had run out of red paint :lol:
IS MY SIGNATURE BIGGER THAN RAYS. Cz 452 american .22+sak mod
S200. .177

no avatar
Mark112
Posts: 210
Joined: Mon Feb 16, 2015 5:25 pm

Re: marking magazine

Thu May 11, 2017 6:25 pm

Hmmm. All of my mags, both .177 and .22 have had red dots. It's mentioned in the user manuals for the rifles also.

magdots.jpg
magdots.jpg (128.48 KiB) Viewed 664 times
S410C .177 Regged - MTC Viper 4-16 x 50
S410K .177 Regged - Hawke Nite-Eye 4-16 x 50 AO IR
S410K .22 - Hawke Sport HD 3-9 x 50 AO IR
Logun Mk1 .22 - AGS 3-9 x 40
Theoben Taunus .22 - Simmons 4-12 x 40 AO
BW1911R2
Walther CP99
Webley Premier .22

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests