EV2 MK4 Transfer port

no avatar
Posts: 1
Joined: Sat May 06, 2017 6:03 pm

EV2 MK4 Transfer port

Sat May 06, 2017 6:16 pm

I bought a secondhand EV2 MK4 in very good condition , but the " Transfer port " thread for the setscrew is damaged . Any suggestion on how to fix this ?

no avatar
Posts: 1
Joined: Mon Jul 11, 2016 6:27 pm

Re: EV2 MK4 Transfer port

Wed May 17, 2017 6:26 pm

I too have this problem.... the thread is so fine that mine has simply worn away. I currently use the proper screw with ptfe strip in, and an old screw to lock that in place. This has only about 3 threads to work on as the first few have simply gone.

Incidentally that was not done by removing the anti tamper.... it just simply wore out constantly trying to get a steady reading.

Doesn't help you I know but hopefully someone will come along and help us.

It seems to fine to use a helicoil.... so re-tapping a larger thread may be the only answer and I suppose providing that new thread gives you a tight fit, this should not affect the ability of it to fine tune the power.

Others may help us here??


Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest