Air Arms Owners Club

Hi guys i have an Airarms S410 classic. I stripped it down because of an air leak whilst it was stripped i polished the hammer and hammer slide now when i tip the gun up or down the hammer slides and makes a noise have i done something wrong it shoots ok.

Hunterboy wrote:Hi guys i have an Airarms S410 classic. I stripped it down because of an air leak whilst it was stripped i polished the hammer and hammer slide now when i tip the gun up or down the hammer slides and makes a noise have i done something wrong it shoots ok.

The only way the hammer could slide is if you left the Hammerspring out, and I doubt that, you will probably find it's the S560 cam plate sliding up and down ( light tinkle sound ) Don't Panic Mr Mannering. Rog

Thanks for that is the S560 the indexing plate. Captain Mannering.

The cam plate operates the indexing post, if you take the mag out you can see it, watch it while you tip gun up and down, I have one that does the same thing. Rog

You were right spot on.

Hunterboy wrote:You were right spot on.

Yay got one right. Rog