s400 cocking problem with rowan mag

no avatar
Chris79
Posts: 10
Joined: Tue Oct 25, 2016 2:22 am

s400 cocking problem with rowan mag

Wed Nov 09, 2016 9:47 pm

Hi all, I have read that you have to hold the bolt back further than when it cocks to index the rowan mags for the s400 so if you are a right handed shooter its better to get a left indexing mag, can anyone confirm this?

no avatar
eboswan
Site Admin
Posts: 3222
Joined: Sun Feb 15, 2015 9:16 am
Location: swansea

Re: s400 cocking problem with rowan mag

Wed Nov 09, 2016 10:06 pm

You can alter the bolt handle too suit the left handed shooter but the bolt would then be upside down if i remember correctly.
IS MY SIGNATURE BIGGER THAN RAYS. Cz 452 american .22+sak mod
S200. .177

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: s400 cocking problem with rowan mag

Wed Nov 09, 2016 11:46 pm

Chris79 wrote:Hi all, I have read that you have to hold the bolt back further than when it cocks to index the rowan mags for the s400 so if you are a right handed shooter its better to get a left indexing mag, can anyone confirm this?

Not sure what you are saying, Rowan mags are very simple to use, cock it and turn the mag to index pellet, if you are right handed as I am I put the mag in from left side, if your a left hander get the kit that goes in from the right. Rog

no avatar
eboswan
Site Admin
Posts: 3222
Joined: Sun Feb 15, 2015 9:16 am
Location: swansea

Re: s400 cocking problem with rowan mag

Thu Nov 10, 2016 8:04 am

I think i may have read that completely wrong :roll:
IS MY SIGNATURE BIGGER THAN RAYS. Cz 452 american .22+sak mod
S200. .177

User avatar
Blackbaronfish
Posts: 3690
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: s400 cocking problem with rowan mag

Thu Nov 10, 2016 8:52 am

Chris79 wrote:Hi all, I have read that you have to hold the bolt back further than when it cocks to index the rowan mags for the s400 so if you are a right handed shooter its better to get a left indexing mag, can anyone confirm this?


https://www.youtube.com/results?search_ ... 0+magazine
http://www.rowanengineering.com/pdf/S40 ... uct177.pdf

BBF
Did I mention that I'm the only one to have attended EVERY meet since we started

no avatar
Chris79
Posts: 10
Joined: Tue Oct 25, 2016 2:22 am

Re: s400 cocking problem with rowan mag

Thu Nov 10, 2016 5:50 pm

Thanks for the help chaps! Left handed mag kit it is then!

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: s400 cocking problem with rowan mag

Thu Nov 10, 2016 7:10 pm

Don't forget the bracket comes in two sizes ! Normally 15mm for late S400. Rog

no avatar
Chris79
Posts: 10
Joined: Tue Oct 25, 2016 2:22 am

Re: s400 cocking problem with rowan mag

Thu Nov 10, 2016 9:04 pm

Thanks Roger! Yeah since I have been looking at the mag kits I've measured,measured and measured again just to make sure! I need the 15mm version as my s400 is brand new, just need to wait till the 25th to buy one now!, in the meantime I'm now looking for a stumpy silencer that has the matching swirl effect that the original muzzle end has, the hugget belita fits the bill but not my wallet at the minute unless I can find a good deal privately, I'm not a big fan of the 5 and 6" long plain can silencers.

no avatar
Roger5
Posts: 1071
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: s400 cocking problem with rowan mag

Thu Nov 10, 2016 9:36 pm

You will then need 10mm barrel adaptor, Rowan again I'm afraid, never ends does it. Rog

User avatar
Blackbaronfish
Posts: 3690
Joined: Sun Feb 15, 2015 6:20 pm
Location: Nuneaton

Re: s400 cocking problem with rowan mag

Thu Nov 10, 2016 9:57 pm

Rowan stuff is quality 8-) . I will be visiting the boys in the morning for a cuppa :mrgreen:
If you didnt know....the twins Dave and Derek Rose created Hypno Disk in the first Robot Wars 8-)

BBF
Did I mention that I'm the only one to have attended EVERY meet since we started

Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests