s400 and regulators

no avatar
Roger5
Posts: 886
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: s400 and regulators

Sun Nov 06, 2016 6:27 pm

Chris79 wrote:
eboswan wrote:Keep an eye on the higher 11.9ftlb it may creep up as the rifle beds in/leads up.


Thanks for the heads up!, it was 11.09 though not 11.90 so that's really only about 11.1.... isn't it? :?: I'm pretty sure its nearer 11.1? I hope its nearer 11.1! :shock:

That looks fine to me, I like mine about 773fps at that sort pressure, and as I say they don't really need a reg. Rog

no avatar
Chris79
Posts: 10
Joined: Tue Oct 25, 2016 2:22 am

Re: s400 and regulators

Sun Nov 06, 2016 6:48 pm

Roger5 wrote:
Chris79 wrote:
eboswan wrote:Keep an eye on the higher 11.9ftlb it may creep up as the rifle beds in/leads up.


Thanks for the heads up!, it was 11.09 though not 11.90 so that's really only about 11.1.... isn't it? :?: I'm pretty sure its nearer 11.1? I hope its nearer 11.1! :shock:

That looks fine to me, I like mine about 773fps at that sort pressure, and as I say they don't really need a reg. Rog


Yeah I don't think its actually going to need one after seeing the string as there wasn't a lot of deviation between shots! but I like to find out any parts or mods that can be done to anything I own, I cant help wanting to just strip it down and have a look inside!

no avatar
Roger5
Posts: 886
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: s400 and regulators

Sun Nov 06, 2016 7:43 pm

Yes, I have the same problem,my S510 is in bits in the living room, kitchen and bedroom at the moment, and she's not back until the 10th. Rog

no avatar
Roger5
Posts: 886
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: s400 and regulators

Fri Nov 11, 2016 12:26 pm

Just finished fitting Altaros reg to my S510 and it's doing 11.36ftlb-780fps. Pleased with that, did use a lot of air getting it on the money, have had it apart quite a few times, but ok now, air screw is backed right out so plenty of adjustment if I want to turn it down a bit.Rog

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests