Page 1 of 1

FTP 900 Barrel

Posted: Sun Jul 03, 2016 7:53 pm
by Brickmaker
Sorry if this has been talked about before but I am new on this forum.

My FTP900 has suddenly become inaccurate, its about 6 months old and a 2015 model, it's had about 1000 pellets though it, and it was quite accurate in the winter,
I have now noticed that the two sleeves on the barrels don't revolve, well the front one does but the back one doesn't,
my question is should they both revolve freely and if they should how can I put this right, it is still under warrenty.

Any advice would be useful.

Re: FTP 900 Barrel

Posted: Sun Jul 03, 2016 8:28 pm
by Blackbaronfish
As its under warranty could you take it back to the shop for a once over. Failing that you could always ring Air Arms direct.

BBF

Re: FTP 900 Barrel

Posted: Sun Jul 03, 2016 8:44 pm
by gary martin
i know nothing about the sleeves on the barrel. 1000 shots, have you cleaned the barrel? if not try it, put about 20 shots through it to re-lead the barrel then try.

Re: FTP 900 Barrel

Posted: Sun Jul 03, 2016 9:01 pm
by Brickmaker
Cleaned it today and put a few pellets through it too.

Re: FTP 900 Barrel

Posted: Sun Jul 03, 2016 9:50 pm
by Blackbaronfish
And how was it

BBF

Re: FTP 900 Barrel

Posted: Sun Jul 03, 2016 10:25 pm
by Brickmaker
I haven't tried it at 25yds yet but at about 10Mts have a look at this
https://www.facebook.com/photo.php?fbid ... 9461972926

I know its only 10 but once I have put a few through it it should get better.