Page 1 of 2
S410 tdr bigger air cylinder
Posted: Tue Jun 28, 2016 7:34 pm
by Eddi3
So I was wandering after researching with no real success can you get a bigger air cylinder my tdr is pre anti tamper and while at the range the other day there was a bloke with a 2013 tdr and his air cylinder was considerably longer, I am planning on fitting a regulator which I know will squeeze an extra few shots out
Re: S410 tdr bigger air cylinder
Posted: Tue Jun 28, 2016 7:51 pm
by Brooksy
Was his a .177? I'm sure they have longer cylinders than the .22 to give a decent shot count.
Re: S410 tdr bigger air cylinder
Posted: Wed Jun 29, 2016 2:23 pm
by Eddi3
No it was a 22 as we were having a chat and comparing old to new his felt abit heavier but the air cylinder was to the end of his barrel
Re: S410 tdr bigger air cylinder
Posted: Wed Jun 29, 2016 5:00 pm
by Mark112
Hi,
I think the early TDR had something like a 200mm long cylinder while the later ones are 300mm.
Mark
Re: S410 tdr bigger air cylinder
Posted: Wed Jun 29, 2016 5:08 pm
by Eddi3
I see so would the newer cylinder fit on an older rifle
Re: S410 tdr bigger air cylinder
Posted: Wed Jun 29, 2016 5:31 pm
by Mark112
Eddi3 wrote:I see so would the newer cylinder fit on an older rifle
I believe so. Just check that the extra 100mm isn't going to cause it to foul the silencer in use. The other chap may have had the carbine barrel fitted to his one.
Mark
Re: S410 tdr bigger air cylinder
Posted: Wed Jun 29, 2016 5:40 pm
by Eddi3
He had a muzzle adaptor on maybe to extend the silence from cylinder, is there any website that sell cylinders I found a custom one that does aluminium ones it can so a buddy bottle style one for s200 but no joy for other models
Re: S410 tdr bigger air cylinder
Posted: Wed Jun 29, 2016 6:38 pm
by Brooksy
It's all down to the valve Eddie. The 200 cylinder is removable isn't it?
Re: S410 tdr bigger air cylinder
Posted: Thu Jun 30, 2016 11:50 am
by Roger5
Eddi3 wrote:He had a muzzle adaptor on maybe to extend the silence from cylinder, is there any website that sell cylinders I found a custom one that does aluminium ones it can so a buddy bottle style one for s200 but no joy for other models
Probably find that adaptor was for a different make of moderator ie weihrauch, all barrels on tdr are 15.5 . And the old ones had short cylinders, later ones are longer but should still fit, if still unsure ask Julian our spares man. Rog
Re: S410 tdr bigger air cylinder
Posted: Thu Jun 30, 2016 4:28 pm
by Mark112
Brooksy wrote:It's all down to the valve Eddie. The 200 cylinder is removable isn't it?
It's not like the a Rapid where the air stays in the cylinder when it is unscrewed. You drain the rifles air, unscrew the short cylinder and screw in a longer one from a carbine (300mm). Threads etc are the same just the length changes. Contact Julian Bond on this website (or bgaltd on the web) as he is the supplier of AA spares. IIRC they are about £35 or so.
Mark