Page 1 of 1
S400 rowan adjustable trigger
Posted: Mon Dec 07, 2015 3:43 pm
by Lumphammer666
Hi guys
After a bit of advice if possible,just bought a rowan adjustable trigger and have fitted it but flopping around when gun not cocked? Any ideas as to best set up would be appreciated.
Regards
Lee
Re: S400 rowan adjustable trigger
Posted: Wed Dec 09, 2015 12:20 pm
by shy talk
If Rowan engineering have a help line,why not ask them. Even if they don't have a help line, I would ask for there help. Hope this helps you.
A.T.B. (shy talk )
Re: S400 rowan adjustable trigger
Posted: Thu Dec 10, 2015 7:44 pm
by Geordie
Lumphammer666 wrote:Hi guys
After a bit of advice if possible,just bought a rowan adjustable trigger and have fitted it but flopping around when gun not cocked? Any ideas as to best set up would be appreciated.
Regards
Lee
The 4/500 range all suffer from floppy trigger syndrome unfortunately
Its normal mate.
Re: S400 rowan adjustable trigger
Posted: Fri Dec 11, 2015 6:16 pm
by Lumphammer666
Thanks guys
Re: S400 rowan adjustable trigger
Posted: Mon Dec 21, 2015 4:08 am
by Me1r10n
Yes as previously explained the 4/500 range does suffer the floppy trigger syndrome when not cocked, but only with the 2 sear set up and yes some of the earlier editions only have this, but more recent trigger mechanisms have the three sear set up, and with correct fine tunning completely remove this "issue".
Personally I like the floppy trigger, especially when hunting it reminds me if the weapon is cocked or not. (really I should state you SHOULD ALWAYS know the state of your weapon) And that this is not exactly reliable, or "safe" practice.
Sorry for the ramble. To re-cap. It is personal preference and resolveable.